6140 E
20Pages

Catalog excerpts

563 kW (Tier IV) 708 kW (Tier II, Tier IV) 140 t 63,5 m Heavy Duty Cycle Crawler Crane

What makes up the E-Series Over 65 years of experience in the design and construction of duty cycle cranes Uncompromisingly high performance in all areas Technology that can be mastered: High-quality components without over-engineering Long service life and high value stability 1969: First full hydraulic duty cycle crawler crane worldwide, SK 15 Peak performance Maximum usability Easy transport Maintenance and service made easy Green Efficiency Consultation and support in your area Save fuel – reduce operating costs Work quietly – protect operator and environment Durable mechanical systems...

Open the catalog to page 2

Technical data, equipment MACHINE TYPE Operating pressure High-performance filtration with long-term change interval, contamination level indicator Hydraulic tank 1200 l (1000 l to the middle of the sight glass) Control system Proportional, precision hydraulic servo control of the movements, 2 servo joysticks for work functions, supplemental functions via switches and foot pedals – arranged clearly and ergonomically Organic oil filling SENNEBOGEN HydroClean 3 μm hydraulic Model (type) ENGINE Power CAT C18 563 kW / 766 PS at 1800 min (TIER IV) CAT C27 708 kW / 963 PS at 1800 min-1 (TIER...

Open the catalog to page 4

Technical data, equipment WINCH ATTACHMENTS Design Decades of experience and the latest computer simulations guarantee the greatest degree of stability and longest service life Boom adjustment winch Drive via slant axis hydraulic motor with compact planetary gear, pulling force 110 kN, rope diameter 20 mm, adjustment speed 15° to 83° in approx. 90 seconds. Safety brake Spring-loaded multi-disk brake Auxiliary jib, for load ratings to 24 t Fly jib up to 29.9 m Load moment limitation for hoisting Crane and free fall brakes are spring-loaded, maintenancefree, low-wear disc brakes running in...

Open the catalog to page 5

Crane equipment Auxiliary jib SH Boom configuration 13.1 Lower boom section type 2008 Boom section type 2008 Boom section type 2008 Boom section type 2008 Head piece type 2008 Auxiliary jib S24.1 (option) Technical features and dimensions subject to change. ARBEITSRADIUS / WORK

Open the catalog to page 6

Load capacity 1. The specified safe working load values apply to ensure level and firm standing of the machine. 2. he safe working load values are specified in tons (t) and apply for 360 degrees. T 3. he safe working loads take the standards ISO 4305 Tab. 1+2 and the tilt angle method (tilt angle 4°) into account T 4. educt the weight of the load handling devices (hook, suspension gear) from the safe working loads. D 5. he safe working load values apply for the maximum undercarriage track width of 4600/5500 mm. T 6. oad ratings must be limited or reduced to take into account unfavorable...

Open the catalog to page 7

Load capacity Main boom Undercarriage track width 5500 mm Technical features and dimensions subject to change.

Open the catalog to page 8

Number of strands and load capacity* For 300 kN/350 kN winches with 36 mm rope diameter For 250 kN winches with 34 mm rope diameter Capacity Rope strands & max. load capacity Technical features and dimensions subject to change. *Information applies

Open the catalog to page 9

Diagramm Schlitzwandgreiferbetrieb Diaphragm wall claw equipment HÖHE ÜBER BODEN / HEIGHT ABOVE GROUND [m] Technical features and dimensions subject to change. Winch pulling force [m] ARBEITSRADIUS / WORKING RADIUS [kN] 1. specified safe working load values apply to ensure level and firm standing of the machine. The 2. he safe working load values are specified in tons (t) and apply for 360 degrees. T 3. he load ratings do not exceed 60% of the tilt load. T 4. he safe working load values apply for the maximum undercarriage track width of 600/5500 mm. T 5. educt the weight of the load...

Open the catalog to page 10

Technical features and dimensions subject to change. Diaphragm wall claw equipment Undercarriage track width 4600 mm Diaphragm wall claw equipment Undercarriage track width 5500 mm Load capacity

Open the catalog to page 11

ARBEITSRADIUS / WORKING RADIUS [m] 1. specified safe working load values apply to ensure level and firm standing of the machine. The 2. he safe working loads are given in tons and apply for 360 °C. T 3. he load ratings do not exceed 66.7% of the tilt load. T 4. he safe working load values apply for the maximum undercarriage track width of T 4600/5500 mm. 5. educt the weight of the load handling devices (hook, suspension gear) from the load ratings. D 6. oisting a load that exceeds the maximum winch pulling force of one winch is only allowed H if each winch is not overloaded. Technical...

Open the catalog to page 12

Load capacity Grab equipment Undercarriage track width 4600 mm 34 t Boom angle Grab equipment Undercarriage track width 5500 mm 34 t Boom angle Technical features and dimensions subject to change.

Open the catalog to page 13

Dragline bucket equipment Diagramm Schleppschaufelbetrieb 50° Dredging arc: R = Working radius A = Maximum dredging width = approx. R + 1/3 to 1/2 (H-K) T = Dredging depth = approx. 40-50% of R H = Height K = Length of the dragline bucket HÖHE ÜBER BODEN / HEIGHT ABOVE GROUND [m] Technical features and dimensions subject to change. Winch pulling force [kN] Rope diameter [mm] Minimum tensile strength [kN] max. safe working load in drag bucket operation [t] ARBEITSRADIUS / WORKING RADIUS [m] 1. specified safe working load values apply to ensure level and firm standing of the machine. The 2....

Open the catalog to page 14

Load capacity Dragline bucket equipment Undercarriage track width 4600 mm 34 t Boom angle Dragline bucket equipment Undercarriage track width 5500 mm 34 t Boom angle

Open the catalog to page 15

Base Machine Dimensions bmessungen Grundmaschine Abmessungen Grundmaschine 0 49

Open the catalog to page 16

Transport dimensions and weights 9241 14822 Base machine - with stay rack, self-assembly system, Ballast storage equipment, 2 x 35 t (2 x 25 t) freefall winches, CAT engine C27 (C18) - without traveling gear, without ballast, without lifting ropes - with lower boom section Transport weight: 58.7 t (55.1 t) Weight of lifting ropes 36 mm/34 mm: 6.4 kg/m, 5.7 kg/m Base machine - with stay rack, self-assembly system, Ballast storage equipment 2 x 35 t (2 x 25 t) freefall winches, CAT engine C27 (C18) - without traveling gear, without ballast, without lifting ropes, without boom base Transport...

Open the catalog to page 17

6140 E 20Pages

Catalog excerpts

All SENNEBOGEN Maschinenfabrik GmbH catalogs and technical brochures

6140 E
20Pages