*mydirectindustry

Z-D-IN

Product catalog summary

Overview: The document provides technical specifications and details for Modbus Digital Modules, specifically focusing on the Z-D-IN 5-Channel Digital Input Module. It includes information on accessories, software, technical specifications, communication, signals, configuration, standards, and similar products.

Accessories & Software: The document lists accessories such as the Z-PC-DIN backplane for power and bus communication, Z-SUPPLY switching power supply, and software like IEC 61331 programming software and Plug&Play configuration software.

Technical Specifications:

Electrical Specifications: Power supply ranges from 10-40 Vdc or 19-28 Vac with a power consumption of 2.5 W. It features 1,500 Vac isolation and IP20 protection degree.
Operating Conditions: The module operates within a temperature range of 0 to +55 °C and has dimensions of 17.5 x 100 x 112 mm, weighing approximately 140 g.
Connections: Includes removable terminal blocks and a rear IDC10 connector for Z-PC backplane, supporting a max wire size of 2.5 mm².

Communication, Elaboration, Memory:

Interface: Utilizes a 2-wire RS485 interface with speeds up to 57,600 bps and supports ModBUS RTU slave protocol.
Connectivity: Supports up to 32 nodes with a communication time of less than 10 ms at 38400 baud and a maximum distance of 1,200 m.
Data Memory: Features EEPROM for configuration parameters with a retention time of 10 years, including 4 registers of 16 bit and 1 register of 32 bit.

Signals: The module has 5 channels, opto-isolated for various input types, with 4 inputs having a 16-bit counter function at a max frequency of 100 Hz and 1 input with a 32-bit counter function at a max frequency of 10 kHz. It includes a bounce filter adjustable between 5 to 250 ms.

Configuration: Configuration is facilitated through DIP switches for baud rate, node, parity, serial port, bit stop, and termination line. Software options include Z-NET3 (IEC 61131) and EASY Z-D-IN (plug&play).

Standards and Approvals: The module is CE and RINA approved, complying with norms such as EN 50081-2, EN 55011, EN 50082-2, EN 61000-2-2/4, EN 50140/141, and EN 61010-1.

Similar Products: The document lists similar products like Z-10-D-IN, Z-D-IO, ZC-24-DI, and ZC-16DI-8DO, each with varying channel configurations and functionalities.

Order Codes: The Z-D-IN module features 5 digital inputs with self-powered 16 Vdc shared negative pole, removable terminals, and input channels protected by 600 W/ms TVS transient current suppressers. It supports RS485 serial communication with Modbus-RTU protocol and a maximum of 32 nodes.

Catalog excerpts

I/O SYSTEMS> MODBUS DISTRIBUTED I/O SYSTEM > Modbus Digital Modules Z-D-IN5-CH DIGITAL INPUT MODULE / RS485 MODBUS RTU Z-D-IN is 5 digital inputs with self-powered 16 Vdc shared negative pole. The module has removable terminals with section of 2.5 mm2. Input channel are protected by 600 W/ms TVS transient current suppressers. Z-D-IN input channels have 100 Hz 16 bit counters, with settable filter. It's also possible to set the input as fast totalizer with 32 bit, max frequency 10 kHz. RS485 serial communication supports Modbus-Rtu protocol, maximum 32 nodes. Max 3-way isolation module is 1.500Vac. TECHNICAL SPECIFICATIONS APPLICATION NOTE Electrical Specifications ORDER CODES Code Description Z-D-IN 5-CH Digital input module / RS485 ModBUS RTU, 10..40 Vdc / 19..28 Vac ACCESSORIES & SOFTWAR Z-PC-DIN

Open the catalog to page 1

Z-D-IN

Z-D-IN

Catalog excerpts

All SENECA | AUTOMATION INTERFACES catalogs and technical brochures

Archived catalogs