SN901XP
2Pages

SN901XP XtremePro™ 3¼" Clipped Head Framing Nailer This well-balanced light weight XP framing nailer packs plenty of power and won't leave you fatigued at the end of the day. Drives ring, screw, and smooth-shank clipped head nails. SENCO XP tools are specifically engineered for demanding pros and demanding environments. Built with enhanced features and superior components – SENCO’s XP tools always provide the best performance and longest life backed by a 5-year limited warranty. Item# . . . . . . . . . . . . . . . . . . 4Z0001N Selectable actuation trigger Reg. Operating Pressure . . . . . 70-120 psi (4.8 - 8.3 bar) Air Consumption (60 cycles per min.) 5.2 scfm Air Inlet . . . . . . . . . . . . . . . . . 3/8" NPT Tool Weight . . . . . . . . . . . . . . 7.8 lbs (3.54 kg) Height . . . . . . . . . . . . . . . . . . 11.9" (302 mm) Length . . . . . . . . . . . . . . . . . . 17.3" (440 mm) Width . . . . . . . . . . . . . . . . . . 4.5" (114 mm) Fastener Capacity . . . . . . . . . . 83 Fastener Specifications LIMITED WARRANTY Framing, sheathing, truss building, sub-flooring and decks. Other applications include crate and box assembly, pallet making, furniture frame assembly and fencing. • Well balanced, ergonomic design • Uses less air to drive nails- Highly efficient internal design • Dry Fire Lockout • Reduced jams and mis-feeds - Patented TrueDrive magazine • Low profile design fits easily between studs and joists • Retractable Rafter Hanger • Contact or sequential trigger actuation - Patented drive selector • 5-year limited warranty Shank Diameter Fastener Range Finish . . . . . . . Collation . . . . . .113” - .135” 2" – 3¼" Bright Basic, Galv. & Stainless 34˚ angled strip *Choose the right actuation mode! Sequential Actuation (also known as restrictive trigger or trigger fire) operates in the following a sequence - depress the safety element at the nose of tool against the work surface then pull the trigger. After each fastener is driven, release the trigger and lift the tool off the work surface before starting the sequence again. This trigger is recommended and acceptable for most applications. Contact Actuation (also known as dual action, bounce or bottom fire) operates in the following sequence- pull the trigger first and keep the trigger pulled while moving the tool along the work surface with a bouncing motion, depressing the safety element at the nose of the tool against the work surface where the fastener is to be driven. This trigger is recommended for use by trained professionals only in high production or volume applications. Always read the Operators Manual and Safety Instructions with all tools to ensure proper use and safety precautions. For additional information on trigger systems and how SENCO will save you time, reduce costs, and increase quality, call our toll-free Action Line: 800-543-4596, or visit our web site at: www.senco.com. Safety First. The only way to work. | 800-543-4596 | www.senco.com | ©2013 Senco Brands, Inc.

SN901XP Features Ergonomic design Limited Warranty XP Durability Full Comfort Overmold Grip Resilient grip reduces fatigue Rafter Hanger Easily fits between studs & joists Aluminum Housing Lightweight, superior durability Rear Two-Step Loading Quick and easy for right or left handers Highly efficient internal design, runs great with ¼” line fittings Patented TrueDriveTM Magazine Thumbwheel Adjustable Depth-of-Drive Reduced jams and mis-feeds Selecatable Trigger Drives nails to a consistent and controllable depth Nail Lockout Aggressive Toenail Safety SENCO® RoundStrip™ 34˚ Smooth Round Head...