video corpo

SHF50

SHF50

Product catalog summary
Applications
Designed for the installation of hardwood flooring ranging from 1/2" (12mm) to 33/32" (26mm). An optional adapter is required for 1/2" applications.
Features and Benefits
  • Requires only a single strike with 4 lbs. of swing weight to drive the fastener, reducing arm fatigue.
  • Mallet-actuated firing sets floorboards and drives cleat nails at a 45˚ angle.
  • Includes a mallet and comes with a 1-year limited warranty.
Fastener Specifications
  • Type: L type cleat nail
  • Range: 1½, 1¾, and 2 inches
  • Finish: Bright Basic
  • Collation: Glued strip
Specifications
  • Item Number: 710001N
  • Operating Pressure: 70-120 psi (4.8 - 8.3 bar)
  • Air Inlet: 3.8" NPT
  • Tool Weight: 12 lbs (5.5 kg)
  • Height: 17.75" (451 mm)
  • Length: 16.25" (413 mm)
  • Fastener Capacity: 110
Trigger Mechanism
The sequential actuation trigger requires the safety element to be depressed against the work surface before pulling the trigger. This mechanism is recommended for most applications.
Additional Information
The SHF50 is unique in the industry for its pneumatic hardwood flooring nailer with a work contact safety, activated by positioning on the flooring tongue rather than a trigger.
See more

Catalog excerpts

SHF50-1

Pneumatic Mallet Actuated Hardwood Flooring Nailer SHF50 is the industry's only pneumatic hardwood floring nailer with a work contact safety, which is activated when the tool is positioned on the florin tongue - not by depressing a trigger. Specifications Item# . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Reg. Operating Pressure. . . . . . . . . . . . . . . . Air Inlet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Tool Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . Height . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Length . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Fastener Capacity . . . . . . . . . . . . . . . . . . . . . . Fastener Specifications Fastener . . . . . . . . . . . . . . . . . . . . . . . Fastener Range . . . . . . . . . . . . . . . . Finish. . . . . . . . . . . . . . . . . . . . . . . . . . Collation. . . . . . . . . . . . . . . . . . . . . . . L type cleat nail 1½, 1¾ and 2" Bright Basic Glued strip 11/2 13/4 Applications For the installation of 1/2" (12mm) to 33/32" (26mm) hardwood flooring. (1/2" applications require optional adapter.) Features and Benefits • Easy on the arm, requiring a single strike of only 4 lbs. of swing weight to drive fastener. • Mallet-actuated firing simultaneously sets floor boards (tongue into groove) and drives cleat nail at an ideal 45˚ angle • Mallet included • 1-year limited warranty For additional information on how SENCO will save you time, reduce costs, and increase quality, call us at 1-800-543-4596 to find your nearest Authorized Senco Dealer or Distributor or visit our web site at: www.senco.com Sequential Actuation Trigger (also known as restrictive trigger or trigger fire) operates in the following sequence - depress the safety element at the nose of tool against the work surface then pull the trigger. After each fastener is driven, release the trigger and lift the tool off the work surface before starting the sequence again. This trigger is recommended and acceptable for most applications. Cincinnati Hispanic Fest

 Open the catalog to page 1
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.