THE REFERENCE FOR ELEVATOR BELTS PRODUCT SHEET TranslevTM is a tailor-made engineered solution recommended for elevator belts. It is available in three versions. ptimal solution for safe material transport O in elevator conveyors vailable with textile or steel cord reinforceA ments asy bolting of elevator buckets E or light to heavy applications F elt widths up to 2000 mm B ominal belt strengths up to 4000 N/mm N TRANSLEV TM M The Translev M has a full steel carcass design. Steel cords in longitudinal direction provide high nominal belt strength at low elongation, as well as two layers of steel wefts in cross direction. This construction provides the highest bolt pull-out values combined with the highest possible puncture resistance. Product benefits Excellent bucket attachment and bolting utstanding cord adhesion which is of particular importance for O high temperature applications Full rubber penetration and high cord adhesion values due to optimised rubber compound in combination with the open steel cord design mall longitudinal cord diameters allow smaller pulley diameters S Available with heat resistant covers: TEA cover for material up to 80 °C (130 °C peaks) EB cover for material up to 100 °C (150 °C peaks) T TEC cover for material up to 130 °C (200 °C peaks) Open-pit mining Lignite and hard rock mining Steel industry Grain and sugar industries Salt industry Mineral processing plants Paper and wood industries Recycling industry Port operations Power and heating plants Chemical industry and fertilisers DATA Translev M standard range (other strengths and dimensions are available on request): Belt width: 300 mm to 1800 mm Nominal belt strength: 1000 N/mm to 2250 N/mm ransflam (flame retardant) T ransoil (oil resistant) T ranstherm (heat resistant) T Translev M standard range Nominal belt strength (N/mm)

TRANSLEV TM T: for light applications (e.g. transport of grains) Translev T standard range (other strengths and dimensions are available on request: Belt width: Up to 1690 mm Nominal belt strength: 400 N/mm to 1600 N/mm Translev T with GMS cover standard range Cover thickness (mm) Nominal belt strength (N/mm) rain and sugar industries G Salt industry Mineral processing plants Translev TR is an upgrade of the standard version with its textile carcass (polyester warp, polyamide weft) inserted between two strong transverse textile reinforcements and covers. Product benefits Paper and wood industries...