THE UNBEATEN REFERENCE FOR IMPACT PROTECTION PRODUCT SHEET The RipstopTM range encompasses several options enabling a tailor-made protection of your belt against impact and punctures. Ripstop belts are based on the Multitrans or Sempercord steel carcass. They are available with a textile and a metal option. APPLICATIONS Open-pit and underground mining Lignite and hard rock mining Cement industry Steel industry Aggregates Mineral processing plants Grain and sugar industries R ipstop T combines the convenience of a textile belt with the strength of steel. The multi-ply carcass structure combined with a super high elastic steel cross reinforcement provides the highest impact protection. ADVANTAGES OF RIPSTOP T Outstanding tear resistance ncreased fastener retention I mproved distribution of shocks and I thus higher carcass protection Chemical industry and fertilisers Port operations Power and heating plants Paper and wood industries Recycling industry DATA Ripstop T standard range (other strengths and dimensions are available on request): Belt width: 400 mm to 2600 mm Nominal belt strength: 400 N/mm with 3 plies Up to 3150 N/mm with 5 plies ransdura (anti-abrasive) T Transflam (flame retardant) Transoil (oil resistant) Transtherm (heat resistant) TransEvo (energy saving) Transcold (cold resistant

V a/ 04.2017 © Sempertrans 2017. All rights reserved. All contracts are exclusively subjected to our general terms and conditions. All products must be stored handled and maintained in accordance to the provided instructions and specifications. Sempertrans rejects any liability for improper use of products. Products must not be used in case of any damage or unusual signs of wear and tear. In case of any doubt, specialist advice has to be obtained. RIPSTOP TM M RipstopTM M is designed for the toughest applications. It has its own carcass design with three layers of steel, each one embedded in...