Steam Hose
1 / 1Pages

Steam Hose Application: Suitable for conveying saturated steam and hot wa ter. Feature: Electrically conductive: Resistance R<10 > 6 Ohm. Temperature range: +210ͰC (saturated steam), +120C (hot water). Tried and tested by the chemical industry. Standard/approval: Safety factor: Steam 10: 1, Water 3.15 : 1 EN ISO 6134:2005; (supersedes DIN 2825:1994). Tube: EPDM, black, smooth, electrically conductive. Reinforcement: Steel wire braided, zinc-plated. Notice: Cover: EPDM, black, electrically conductive, cloth imЭ pression. Hose conforms to DIN 2825:1994, which has been superseded by EN ISO 6134:2005. Marking: Continuous transfer tape, red: "SEMPERIT S DS1 Sattdampf/ Saturated Steam 210 C Sempersteam PN 18 bar R < 10 Red cover available on request. > 6 Ohm" as well as red embossed labelling according to EN ISO 6134 (with EN dimensions). ATTENTION: Use only suitable fittings (clamp fittings according to EN 14423:2005). ATTENTION: Superheated steam shortens considerably the service life of the hose! ATTENTION: Please refer to our saturated steam table. Vacuum resistance up to ID 32: - 0.8 bar; up to ID 50: -0.4 bar; > than ID 60 no vacuum resistance! > Article number Internal-И in Wall width External- Work. pressure (max.) bar Number of Bending radius Weight Coil length mm inches in mm in mm Satur. steam Hot water inserts (min.) in mm approx. kg/m (max.) m 48706 1360 13,0 1/2 6,0 25,0 18 55 2 80 0,55 40 48706 1660 16,0 5/8 6,0 28,0 18 55 2 90 0,60 40 48706 1960 19,0 3/4 6,0 31,0 18 55 2 110 0,70 40 48706 1970 19,0 3/4 7,0 33,0 18 55 2 110 0,85 40 48706 2575 25,0 1 7,5 40,0 18 55 2 180 1,10 40 48706 3280 32,0 1 1/4 8,0 48,0 18 55 2 250 1,55 40 48706 3880 38,0 1 1/2 8,0 54,0 18 55 2 300 1,80 40 48706 5090 50,0 9,0 68,0 18 55 2 420 2,65 40 48706 5190 50,8 2 9,0 68,8 18 55 2 420 2,65 40 48706 6010 60,0 10,0 80,0 18 55 2 500 3,45 40 48706 6310 63,5 2 1/2 10,0 83,5 18 55 2 540 3,55 40 48706 7510 75,0 10,0 95,0 18 55 3 650 4,90 40 > Please note: General information about our range of products can be found in the appendixto this catalogue. Before using with new or untested media, or before using in applicationsthat are not covered in the product information, written advice must first be obtained from aspecialist dealer or a Semperit application engineer. All products must be inspected regularlyfor operational safety. For safety reasons, hoses must be replaced in the event of damage, esحpecially if the cover is damaged. All products must be stored and maintained according toour storage, care and maintenance instructions, and according to DIN 7716:1982.We are constantly developing and improving our products for our customers. For the latestproduct information, please visit our website www.semperflex.com regularly or contact one ofour specialist dealers or Semperit application engineers. Contracts are agreed according toour general terms and conditions. Subject to change without notice. Important notice: This catalogue has been prepared with the greatest care in order to provideyou with all the information you need. The information contained herein incorporates the lateststate-of-the-art technology, and is the result of trials and tests carried out over many years, orconforms to the resistance requirements of the media listed as set out in ISO TR 7620:2005(E). The individual conditions of use affect the use of each product. They therefore only ensurethe safety that can be expected assuming that the specifications in our written product information, the specifications regarding resistance to chemicals and our cleaning procedures are allcomplied with. We cannot guarantee this level of safety in the event of improper handling, e.g. squashing, rupturing, stretching or filling with media that are not permitted. Unless specifiedotherwise, all hoses are manufactured to EN ISO 1307:2006. Date: 31.08.2007 size="-3">