SPECIFICATIONS Application Pressure hose suited for sewer cleaning vehicles, for flushing drains and sewers in industry, commerce and infrastructure. Very cost effective due to its highly abrasion and weather resistant cover. (Abrasion according to EN ISO 6945:2000, max 0.5g (100N)). The smooth cover provides a low friction coefficient and is easily cleaned. Temperature range Safety factor SBR, black, antistatic, smooth. Textile braided. NR/BR, black, resistant to ozone and weather, abrasion resistant, antistatic, smooth. continuous embossed tape, orange letters: "SEMPERIT (S) IK 25 PN 250 bar Month/Year ZH 1/406 MADE IN EU //////". Other connections on request. Every assembly has a unique serial number on the coupling which, refers to the accompanying test certificate. High quality standards ensure maximum safety (each hose is pressure tested and the bore size is continuously checked electronically). TECHNICAL DETAILS Article number Wall width Weight approx. Coil length: y = 0 : 40 m, y = 1 : 80 m, y = 2 : 120 m, y = 3 : 60 m, y = 4 : 100, y = 5 : 150 m, y = 6 : 160 m, y = 7 : 200 m (up to and including DN25), y = 8 : 180 m. Other lengths on request. Steel crimped fittings with BSP threaded connections (one end male, one end female) with 60° conical fittings are used as standard. Other connections on request. Please note: Before using our products with new or untested media, or for applications that are not clearly indicated in the product information, written advice must be obtained from a specialist dealer or a Semperit application engineer. For safety reasons, all products must be inspected regularly for operational safety and replaced in the event of any damage (especially of the cover) or unusual signs of wear and tear. All products must be stored, handled, and maintained in accordance with all our respective instructions and DIN 7716:1982. The information in our catalogue as well as each individual datasheet is subject to change at any time without notice since we are constantly developing and improving our products and due to constant technical developments after the latest release date of the catalogue and/or individual datasheets. To always have the latest product and safety information make sure you visit our website (https://hoses.semperitgroup.com/) regularly or contact one of our specialist dealers or a Semperit application engineer. All contracts with Semperflex are exclusively subject to our general terms and conditions (available at ww.semperitgroup.com). Additional important general information about the range, choice and safe use of our

products can be found at our website (https://hoses.semperitgroup.com/) and must be followed without exception. Important notice: Our catalogue and any individual datasheet have been prepared with great care in order to provide you with all the information you need. The information contained therein is based on the latest state-of-the-art industrial technology and many years of experience and testing; whenever indicated for a certain product, we also confirm conformity with the resistance requirements of the media listed in ISO TR 7620:2005(E). However, the individual conditions of storage, maintenance...