Chemical Hose Application: UPEL-P, the chemical protection hose with a black, conductive UPE liner. Suitable for the transport of acids, alkalis, salts, or ganic compounds (alcohols, esters, ketones, etc.) inͭ cl. aromatic substances, chlorinated hydrocarbons and oxidising acids according to our chemical res istance list. Temperature range: Tube, depending on the discharge medium up to +100ͰC, hose, flexible down to -35C. Steam cleaning, without pressure, up to 130аC / max. 30 min. Feature: The Resist U tube has an extremely low friction coef ficient and good abrasion resistance. Safety factor: 4 : 1 Tube: UPE, black, smooth, electrically conductive. Standard/approval: Reinforcement: Special rubber foil, textile, 2 crossed copper wires, zinc plated steel wire helix. EN 12115:1999, TRbF 131/2:1992. Notice: Cover: EPDM, black, electrically conductive, abrasion resistant, weather resistant, cloth impression. ATTENTION: The temperature of the medium must be lower than its boiling point. Marking: Continuous transfer tape, blue/white: "SEMPERIT S Resist-U Chemie UPEL-P͓, as well as con tinuous embossed labelling: "SEMPERIT S EN 12115 UPEL-P SD (DN) PN 16 bar ͢Ħ quarter/year TRbF 131/2". ATTENTION: Please refer to the Semperit resist ance list or, in case of doubt, contact Semperit. ATTENTION: Continuous use at the peak values reͭ duces the service life. ATTENTION: To ensure the assembly is leakproof, it must be tested according to EN 12115:1999. Vacuum resistance to -0.9 bar > Article number Internal- in Wall width External-ؘ Work. pressure Number of Bending radius Weight Coil length mm inches in mm in mm (max.) bar inserts (min.) in mm approx. kg/m (max.) m 48364 1960 19,0 3/4 6,0 31,0 16 2 190 0,80 40 48364 2560 25,0 1 6,0 37,0 16 2 225 1,00 40 48364 3260 32,0 1 1/4 6,0 44,0 16 2 265 1,20 40 48364 3865 38,0 1 1/2 6,5 51,0 16 2 340 1,40 40 48364 5070 50,0 8,0 66,0 16 2 415 2,30 40 48364 6380 63,0 2 1/2 8,0 79,0 16 2 450 3,00 40 48364 7575 75,0 8,0 91,0 16 2 525 3,40 40 56364 8075 80,0 8,0 96,0 16 2 570 4,10 40 56364 0080 100,0 8,0 116,0 16 2 675 5,10 40 > Please note: General information about our range of products can be found in the appendixto this catalogue. Before using with new or untested media, or before using in applicationsthat are not covered in the product information, written advice must first be obtained from aspecialist dealer or a Semperit application engineer. All products must be inspected regularlyfor operational safety. For safety reasons, hoses must be replaced in the event of damage, especially if the cover is damaged. All products must be stored and maintained according toour storage, care and maintenance instructions, and according to DIN 7716:1982.We are constantly developing and improving our products for our customers. For the latestproduct information, please visit our website www.semperflex.com regularly or contact one ofour specialist dealers or Semperit application engineers. Contracts are agreed according toour general terms and conditions. Subject to change without notice. Important notice: This catalogue has been prepared with the greatest care in order to provideyou with all the information you need. The information contained herein incorporates the lateststate-of-the-art technology, and is the result of trials and tests carried out over many years, orconforms to the resistance requirements of the media listed as set out in ISO TR 7620:2005(E). The individual conditions of use affect the use of each product. They therefore only ensurethe safety that can be expected assuming that the specifications in our written product informaͭtion, the specifications regarding resistance to chemicals and our cleaning procedures are allcomplied with. We cannot guarantee this level of safety in the event of improper handling, e.g. squashing, rupturing, stretching or filling with media that are not permitted. Unless specifiedotherwise, all hoses are manufactured to EN ISO 1307:2006. Date: 31.08.2007 size="-2">