Energy Efficient Innovations Smart Grid Solutions Comprehensive power management, control, Ggg communicdtion, dnd protection solutions for smart grid applications from ON Semiconductor.

Ethernet Euridis M-Bus RS-232 RS-485 USB Smart Meter Simplified Block Diagram Smart Card GPRS/GSM/CDMA I/O Interface Smart Card Interface RF Transceiver Infrared Receiver Infrared Remote In I/O Expander Line Driver Current Sensor (Power) Current Sensor (Neutral) Temperature Sensor Power Line Modem Reset Breaker Voltage Sensor Real Time Clock Input Bridge Rectification Voltage Regulation (Switching) Output Rectification/ Sync Rect Voltage Regulation (Linear, Switching) ON Semiconductor has a long history in providing solutions for smart metering applications. We have a proven track record of shipping...

Mixed-Signal ASIC Development Services Value Proposition • Experienced resources and assets to bring customers’ design objectives successfully to market • Ability to integrate customers’ IP into single-chip solution, thereby protecting the IP • Flexible cost models to reduce customers’ total cost High Voltage (40 to 80 V) Low Voltage (<3.3 V) Low or High Voltage Power/ Battery Management Wired Communications Analog Signals Filtering Example: Sensor: • Magnetic Flux • Temperature • Light • Sound • Pressure • Acceleration • Angular Rate Analog/ Digital Conversion Wireless Radio Signal Processing...

PLC Modems/Power Line Driver C8 CDREF ZC_IN Device Smart Grid Modem Smart Metering Modem Power Amplifier PLC S-FSK Modem; A - D Band • ARM Cortex M0 • Baud rate: 4800 Bauds • S-FSK modulation • Hardware embedded MAC + PHY • Embedded 1.2 A, 2-stage power amplifier PLC S-FSK Modem; A - D Band • ARM Cortex M0 • Baud rate: 4800 Bauds • S-FSK modulation • Hardware embedded MAC + PHY PLC S-FSK Modem; A & B Band • ARM7TDMi, 24 MHz core • Baud rate: 2400 Bauds • S-FSK modulation • Hardware embedded MAC + PHY Power Line Driver; Class AB • Low distortion power line driver with optimized interface for PLC...

KNX is a standardized (EN 50090, ISO/IEC 14543), OSI-based the European Home Systems Protocol (EHS), BatiBUS, and the network communications protocol for intelligent buildings. KNX is European Installation Bus (EIB or Instabus). the successor to, and convergence of, three previous standards: KNX Open Standards Applications • EN 50090: European Standard . Connects appliances and sensors, especially for climate • ISO/IEC 14543-3: International Standard and light control to the 9600 Baud KNX twisted pair (TP) • GB/Z 20965: Chinese Standard bus inside a building • ANSI/ASHRAE 135: US Standard . TP...

Wired M-BUS Transceiver Features • Satisfies physical requirements for M-BUS, described in EN 13757-2 and EN 1434-3 • UART communication speeds up to 38400 baud • Integrated 3.3 V VDD LDO regulator (extended peak current of 15 mA) • Supports powering slave device from the bus or from external power supply • SOIC-16 and QFN-20 packages General Application Diagram Smart Grid Solutions

Smart Card Interfaces VDDP Features CONTROL • ISO & EMV compliance • ESD protection on card pins up to +8kV (Human Body Model) CRD_VCC CRD_RST Control Interface Card Type Power Supply Card Detect Clock Divider Inductive DC-DC Smart Card NCN8025/A (SAM/SIM) NCN8024R Demo Board ON Semiconductor

Specialized, Ultra-Low-Power Microcontrollers Features • Ultra-Low-Current consumption • As low as 0.02 µA in Standby Mode • As low as 0.33 µA in Clock Count Mode • As low as 4 mA in Normal Mode • Available with USB, UART, SPI, I2C, Smart Card I/F, Manchester Code, Remote Controller Reception • Available with A/D, D/A, PLL, regulator, op amp, comparator, POR, LVD MCPWM, Analog comparator x 2 PWM (12-bit x 2-channel), Remote control receiver PWM (12-bit x 2-channel), Remote control receiver PWM (12-bit x 2-channel), Remote control receiver PWM; USB 2.0 controller interface; 1 x UART 12-channel...

Development Tools for Microcontrollers Environment-Installer CD-R Main Board EMM02 Sub-Board with Microcontroller Support Tools C-Compiler/Assembler On-Chip Debugger On-Board Writer

Power Supply/Management, Voltage Regulation N POWER SUPPLY/MANAGEMENT DC-DC Converters High Voltage AC-DC Switching Regulator Self-Supply High Voltage Monolithic Switching Regulator for Low Power Offline Power Supplies • Dynamic self-supply, no need of an auxiliary winding • Current-mode fixed frequency (options of 65 kHz, 100 kHz, 130 kHz) High Voltage Monolithic Switching Regulator for Medium Power Offline Power Supplies • 700 V, 5.8 W FET current-mode fixed frequency (65 kHz, 100 kHz) • 650 V, 9/6/2 W rugged FET current-mode fixed frequency (65 kHz, 100 kHz) • 800 V, 3.8 W rugged FET current-mode...

Power MOSFETs for Circuit Breakers and Metering Power Supplies Low Saturation Voltage BJT for Over Current Sensing Circuit 2SC6144SG: 50 V/10 A TO-220F-3FS 2SC5707: 50 V/8 A TP, TP-FA Feedback Circuit • High reliability • Low power dissipation • Avalanche ruggedness • High-speed switching Power Source Voltage Transformer/ Primary Side Clamper Circuit Rectifier Bridge Built in — — Built in Built in — — Built in Built in — — — — — — — — — Built in Built in Built in Built in Built in — — — — — —

Cascadable I/O Expanders Features • I2C and SMBus interfaces • 1 MHz SCL clock frequency • 30 mA SDA sink capability Indicator Lamp Contact Sensor Hot-Plug Controller AUXEN PWRFLT Hot-Plug Controller AUXEN PWRFLT Backplane Systems Keypad Control ADM1030/33 Thermal Sensor and Fan Controller Temperature Control Interrupt Output 64 Programmable Slave Addresses 64 Programmable Slave Addresses Smart Grid Solutions