Technical Data Sheet Outdoor temperature sensor AFD | AFDW Presentation AFD sensor is used for measurement of outdoor temperature in Seltron controllers. It was designed to accurately measure the outdoor temperature with the lowest possible influence of the wall temperature of the building. Typical application - Measurement of outdoor temperature in private or industrial facilities. - Measurement of indoor temperature where greater resistance to mechanical and other influences is required. Mounting Sensor is mounted on the wall. Mounting accessories for mounting on the facade are included. Built in water-level allows easy alignment of the sensor. Outdoor mounting If the sensor is used for measurement of outdoor temperature, it must be ensured that it is not directly exposed to the sun, therefore It should be mounted on the north side of the building. The mounting position is at least 2 m above the ground. It must be ensured that the sensor is not mounted above or near heat sources (window, vent, etc.). Indoor mounting If the sensor is used for measurement of indoor temperature, it must be ensured that it is not exposed to heat sources (at or above radiators, by the doors, ect...). It should be mounted on the inside wall of the building.

Type AFD/Pt Type AFD/M Type AFDW Sensor type Power supply Temperature range Cross section of cables Temperature (°C) Resistance (Q) for AFD/Pt Resistance (Q) for AFD/5 -20 Resistance (Q) for AFD/M and AFDW 68237 Product Order code Description 1FODPT-NN0 Outdoor temperature sensor SELTRON AFD/Pt 1FOD5-NN0 Outdoor temperature sensor SELTRON AFD/5 1FODM-NN0 Outdoor temperature sensor SELTRON AFD/M 1FODW-NN0 Outdoor temperature sensor SELTRON AFDW Seltron d.o.o. Trzaska cesta 85 A SI-2000 Maribor Slovenia March 2025. We reserve the right to make changes due to printing errors or technical modifications....