Magnetic separating systems2.3 MAGNETIC GRIDS BASIC MODEL Magnetic grids are used in piping systems, hoppers, channels, etc. to separate the ferrous particles that circulate through these systems. To ensure a high degree of resistance to corrosion, wear and tear, and to high mechanical stress, the parts of the grates that are in contact with the flow of material are manufactured with AISI 304 stainless steel. The dimensions of the system are designed so that the resistance to the passage of material is minimal. In this way, the accumulation of particles across the flow is avoided. All grids are constructed with Neodymium magnets and the maximum operating temperature will be up to 90°C. There is also a version with a removable magnet system and another with a housing for complete and easy cleaning. • Execution: easy manual cleaning • Neodymium permanent magnets, quality N52 • Housing: AISI 304 stainless steel. Optionally they can be made with stainless steel AISI 316 (for salty and corrosive environments) • Diameter of the magnetic bars: 25 mm • The distance between the centers of the bars is 50 mm • Surface treatment: sandblasted A B C n° of Weight Code mm mm mm bars Kg A B C n° of Weight Code mm mm mm bars Kg Other dimensions under request. Product manufactured according to EHEDG standards, which guarantee the correct design and hygienic maintenance of food production systems.

Magnetic separating systems2.3 MAGNETIC GRIDS MODEL: GRID WITH EXTRACTOR SLEEVE This model is designed to offer maximum efficiency in magnetic separation, guaranteeing quick maintenance and the highest hygiene standards. Quick and easy cleaning: The magnetic bars are housed within a stainless steel sleeve. By sliding the bars outwards, the captured metal particles are released from the magnetic field and fall out automatically. This extraction system drastically reduces loading time for maintenance and cleaning tasks compared to traditional methods. Superior hygiene and food/pharmaceutical safety:...

Magnetic separating systems2.3 MAGNETIC GRIDSMODEL: GRIDS IN HOUSING In this version, the bars that make up the grid are also inside extractor sleeves, but in addition, the grid is mounted in a casing that is attached directly to the transport system. The casing can contain one, two or more layers of grids, depending on the need (amount of ferrous contamination contained in the material). • Housing: AISI 304 stainless steel Optionally AISI 316 for corrosive environments • Standard equipment with NW flanges. Optionally connection without flanges, with undrilled flanges, etc. • Surface treatment:...