ELECTRONIC CONTROLS FOR ELECTROMAGNETIC CHUCKS These equipments are DC power supplies for electromagnetic chucks. They are used to magnetize and demagnetize the chucks, and in addition, while demagnetizing the chuck, they carry out a process that removes the residual magnetism on the contact surface, and thus the piece can be removed more easily. • Input voltage: 230 VAC 50/60 Hz Output voltage: 110 VDC • Magnetized safety contact. • Remote control with MAG/DEMAG button (6 m long cable connection). • Instead of the remote control, there is the possibility of operation by means of pushbuttons with LED indicators and external potentiometer (Series 7133), or via PLC. Electronic control unit 125 W Electronic control unit 220 W Electronic control unit 440 W Electronic control unit 125 W with power regulation. Electronic control unit 220 W with power regulation. Electronic control unit 440 W with power regulation.

ELECTRONIC CONTROL FOR ELECTROMAGNETIC CHUCKS These equipments are DC power supplies for electromagnetic chucks. They are used to magnetize and demagnetize the chucks, and in addition, while demagnetizing the chuck, they carry out a process that removes the residual magnetism on the contact surface, and thus the piece can be removed more easily. • Magnetized and demagnetized safety contact. • Digital remote control with MAG/DEMAG and REG pushbuttons (6 m long cable connection) • Instead of the remote control, there is the possibility of operation via external pushbuttons with LED indicators and...