Demagnetization device These demagnetizes have been designed to remove the remnant magnetism from the pieces after having been in contact with a magnetic field. TABLETOP DEMAGNETIZERS This demagnetizer is ideal for workshops as it removes the remnant magnetism from components, tools, screws, bea-rings, etc. The piece to be demagnetized should be passed over the This model is not designed for continuous use and cannot be connected for more than 10 minutes at one time. It has a thermostat that disconnects its when it reaches the maximum permitted temperature (70°C); it cannot be reconnected until the temperature has dropped to the permitted levels. TECHNICAL CHARACTERISTICS: Type of product: Effectiveness magnetic field: Input Voltage: Magnetic field value: Protection class: Working cycle: Working temperature: TABLETOP DEMAGNETIZERS_ CODE ABC INTENSITY POWER WEIGHT All portable demagnetizes are of intermittent service, they are used to demagnetize parts on an ad hoc basis. The portable 2.0 model can be connected for a maximum of 10 minutes. It incorporates a thermostat that disconnects it when it reaches the maximum allowable temperature (60°C); It cannot be reconnected until the temperature has decreased. TECHNICAL CHARACTERISTICS: Type of product: Demagnetization device Input Voltage: Frequency: Magnetic field value: Protection calss: Work cycle: Working temperature: TABLETOP DEMAGNETIZERS

CONTINOUS SERVICE DEMAGNETIZERS During the manufacturing process of a batch of pieces, they are often subjected to a magnetic field and acquire a certain remnant magnetism. In most situations, to continue or to finish the production, it is necessary to remove the magnetism from these pices. The most convenient is to use a continuous service demagnetizer. TUNNEL DEMAGNETIZERS This demagnetizer is designed for continuous use. This model is suitable for automatic processes where there is a flux of material. The pieces to be demagnetized should be passed through the inside of the device. TECHNICAL...