High productivity of moulded chocolate • Injects liquid fillings (having a max viscosity of chocolate) • Dosage via custom made injection plate • Piston calibrated dosage • The machine can be used for filling with spreads This machine is designed for the potting of spreadable creams of medium and high density and viscosity. The gear pump is built of alimentary grade aluminium and can inject at pressures of up to 4 atmospheres. The body of the pump can be completely dismantled and cleaned in just a few minutes and thus facilitates the changing of the cream to be potted. It is particularly suitable for clients who produce pastes and alimentary conserves of all types. benchtop filling injector Thanks to the microprocessor control and adjustment of the dosage this machine is able to facilitate and quicken the injection of the fillings inside the pralines. The piston pump body is built with a completely cleanable material. The working environment at the point of injection is heated and thermoregulated. If the Filler is used with low density fillings it can reach high levels of productivity. The mould is placed on a vibrating table to optimise the injection of the fillings so eliminating air bubbles which could compromise the shelf life of the product. The filling production of this machine can reach 300 moulds/hour. Needs to be connected to a compressed air source. technical data Electrical specification: 220 V single phase 50 Hz Power required: 1,4 Kw - 16 A - 3 poles Tank capacity: 6 Kg Hourly production rate: 6 moulds/minute (for pralines) Dimensions: h. 580 mm, w. 980 mm, d. 350 mm tecnical data Electrical specification: 380 V three phase 50 Hz Power required: 0,9 Kw - 16 A - 5 poles Tank capacity: 6 Kg Hourly production rate: 50 Kg Dimensions: h. 700 mm, w. 380 mm, d. 380 mm rotating machine for hollow Completely constructed in stainless steel • Safety clutch mechanism on orbital rotation • Speed controlled via inverter This machine, which is entirely built in AISI 304 steel, allows the mould to be fixed into double permanent magnets. It is equipped with a safety clutch mechanism and allows the simultaneous use of 4 workstations. The speed can be adjusted via an inverter and the transmission is supplied with a mechanical safety clutch. tecnical data Electrical specification: 220 V single phase 50 Hz Power required: 0,4 Kw - 16 A - 3 poles Dimensions: h. 1430 mm, w. (total) 570 mm, d. 1000 mm Foot pedal controlled Max weight per arm: mould containing 3 Kg of chocolate accessory machines