Selmetron, S.L.'s motorized gantry cranes are devices designed to lift a load (equipped with a hoist) and transport it effortlessly to its destination, thanks to two motors—one on each side of the gantry—and controlled by a single operator. They move freely over the ground (without rails). A manual push configuration is also available, offering great flexibility of movement since it can be moved in any direction thanks to its swivel casters; however, it requires two operators to move it. The maximum recommended load for manual movement is 2,000 kg. We offer three basic configurations: Motorized...

The gantry can move in a straight line or rotate in either direction, depending on which of the motors is activated. By activating both motors in the same direction, straight-line movement is achieved. If only one motor is activated and the other is stationary, the gantry rotates relative to the stationary side. Finally, by activating both motors in opposite directions to each other, rotation relative to the center of the gantry is achieved. Any of the gantry models can be equipped with a 90° steering mechanism for the drive wheels, which allows movement parallel to the gantry beam. This mechanism...

Motorized transport cart (CTM) For load capacities ranging from 1 ton to 50 tons, and with standard dimensions of up to 5 meters in length and 2.4 meters in width. Motorized transport and lift cart (CTME) Standard load capacities range from 500 kg to 5 tons, with dimensions up to 5 meters in length and 2.2 meters in width. Lifting height: up to 2 meters. Motorized transport and short-lift cart (CTMEC) Standard load capacity ranges from 500 kg to 10 tons, with dimensions of up to 5 meters in length and 2.2 meters in width. The lifting height is only 15 cm. It is designed to move loads using transport...

Other power supply options are also available, including both three-phase and single-phase power, with different voltages and frequencies, upon request. COMMON FEATURES OF CART AND GANTRY SYSTEMSPower Supply All models feature a single connection point to the grid, from which power is distributed to all the machine's motors. The standard power supply is: 400 V, three-phase, 50 Hz, 3 phases + neutral Alternatively, all models can be powered by 24V/48V batteries. This is the option that offers the greatest freedom of movement. Battery-powered models come standard with a charge status indicator...