The MUK is a 4 ... 20 mA head-transmitter, which is fed via the current loop and ist designed for Pt100 resistance thermometers. There can be connected 2-, 3- or 4-wire sensors. For a 2-wire sensor is an alignment of the line impedance possible, with shorted conductors. With Windows it is possible to parameterize the head transmitter with the seliSoft Input signal Anschluss Operation dynamic Measuring transducer accuracy Measuring transducer supply voltage Design Materials housing parts Protection class Adjustment Measuring current Measuring range underflow Measuring range overflow Min. measuring span Measuring unit Offset Output signal Measuring range overriding Measuring range deviation Sensor burst /Sensor short circuit Measuring transducer - burden Resolution EMC Ambient conditions Ambient temperature -40...85°C Ambient infuluence Influence of ambient temperature (Meas.input) typ. 0,0015%/K of measured value Influence of ambient temp. (Current output) typ. 0,005%/K of measuring span influence of burden (Measuring span) 0,02%/100 Ohm Long time stability <=0,1K/year seli GmbH Automatisierungstechnik • DieselstraBe 13 • 48485 Neuenkirchen • Tel. 05973 / 9474-0 • Fax 05973 / 9474-74 • E-Mail [email protected] • Internet http://www.seli.de

MUK-V03 Connection to a digital display 46 SMW-PA-M12 Art.No. S1061-00042 PC-USB-Interface incl. Software for reading out and and parameterization ST-M12-MiniUSB Art.Nr. S1061-00064 Adapter M12 for parameterization of MUK-V03 *Note: To parameterize the head transmitter, it must be supplied externaly with power or supplied by a 2-wire converter * seli GmbH Automatisierungstechnik • Dieselstraße 13 • 48485 Neuenkirchen • Tel. 05973 / 9474-0 • Fax 05973 / 9474-74 • E-Mail [email protected] • Internet http://w