Micro NTC Thermistor Probes LSMC Series 0.0185” (0.469) and 0.0190” (0.0480) probe diameters LSMC 700 Series 10K Ohms, 30K Ohms, or 100K Ohms at 25°C “A” Curve .156” (3.96) Nominal .0185” (.469) Max. AWG 38 Heavy Isomid insulation Epoxy filled polyimide tube LSMC 400 Series 2252 Ohms at 25°C “A” Curve .30” (7.62) Nominal FEATURES Interchangeable accuracies l Quick response l Moisture coating optional l RoHS Compliant These tiny thermistors can be used in many Life Science applications. They are small enough to fit into a hypodermic needle. These quick response LSMC Series thermistors can be used to monitor temperature in many industry applications. SPECIFICATIONS LSMC Series thermistors may be intermittently cycled at temperatures from -50°C to 150°C. Optimum stability is achieved when these thermistors are operated continuously at or below 125°C. A curve (3977K) or B curve (3942K)  Detailed curve material information on pages 24-25. Thermal time constant Typically 5.0 seconds in still air Typically 0.4 seconds in stirred oil Dissipation constant Maximum power rating 0.3 mW/°C in still air 2.5 mW/°C in stirred oil Overall Length or Special Options Overall Length or Special Options 010K = 10,000 Ohms 030K = 30,000 Ohms 100K = 100,000 Ohms Accuracies Accuracy Temp Range Tolerances at 25°C Epoxy filled polyimide tube Other base resistances may be available - Contact Selco. Detailed R-T table information can be found on pages 24-25. Temperature rating/ recommended operating ranges AWG 38 Heavy Isomid insulation Contact Selco Products for your special requirements. Note: Other accuracy temperature ran