Short Lead NTC Epoxy Thermistors HP Series FEATURES l High stability and low cost l Tiebar cut allows consistent PCB placement l RoHS Compliant Blue color Epoxy resin .16” (4.0) Max. .03” (0.7) Tiebar cut .02” ( 0.5) Tin-Plated Copper The HP thermistor is a low cost, tolerance based thermistor. Temperature range Continuous operating temp range Resistance at 25°C 1,000 Ohms 2,000 Ohms 5,000 Ohms 10,000 Ohms 20,000 Ohms 47,000 Ohms 100,000 Ohms Tolerances at 25°C Dissipation constant Thermal time constant Maximum power rating A Curve = 3977K B Curve = 3942K C Curve = 3695K D Curve = 4162K F Curve = 3435K ±1%, ±3%, ±5% 0.5 mW/°C in still air 2.0 mW/°C in stirred oil Typically 3.0 seconds in still air Typically 0.9 seconds in stirred oil A = Curve A B = Curve B C = Curve C D = Curve D F = Curve F X = New letter assigned for special curve .02” ( 0.5) Tin-Plated Copper Leads Optional Special Specification Note: Other thermistor base resistance values, thermistor curves or Beta values, or tolerances may be available. Please contact Selco Products.