DT Series
1Pages

FEATURES l Glass sealed body for high reliability l Excellent thermal cycle endurance l Optional interchangeable accuracy l Some DTs with UL1434 Certification High stability and low cost Leads may be cut or formed 250C or 300C thermal rating RoHS Compliant The DT thermistor is a DO-35 NTC thermistor and is available with a tolerance at 25°C or with an interchangeable accuracy of ±0.2°C over 0° to 70°C. This is highly stable thermistor can be PCB mounted or packaged in a protective housing to meet your application requirements. Temperature range Continuous operating temp range Optional temperature range Continuous operating temp range Resistance at 25°C 10,000 Ohms 15,000 Ohms 30,000 Ohms 47,000 Ohms 50,000 Ohms 100,000 Ohms 200,000 Ohms 500,000 Ohms DT A = Curve A C = Curve C D = Curve D F = Curve F X = Special Dissipation constant Thermal time constant Maximum power rating Other Curves/Betas available upon request 2.0 mW/°C in still air 2.5 mW/°C in stirred oil Typically 3.0 seconds in still air Typically 1.0 seconds in stirred oil 010K = 10K Ohms 015K = 15K Ohms 030K = 30K Ohms 047K = 47K Ohms 050K = 50K Ohms 100K = 100K Ohms 200K = 200K Ohms 500K = 500K Ohms X = Special base resistance value A Curve = 3977K B Curve = 3942K D Curve = 4262K F Curve = 3425K Accuracy Temperature Range Optional 300°C Rating H = 300°C rating Optional Special Specification *Use 0 when the DT series is tolerance based and has a 300°C maximum temperature rating. Note: Some of the DT Series part numbers may have UL 1434 certification. Please contact Selco Products or visit our website for availability. Note: Other thermistor base resistance values, thermistor curves or Beta values, or tolerances may be available. Please contact Selco Products.