SVY High Performance Valve System Structures of Hot Runner System Clamping Plate Sprue Bushing Close-up of a piston Spacer Plate Back up Plate Cavity Plate Valve Pin Close-up of Gate 1. Simple resin flow system Prevents the resin flow to split. Perfect FIFO system. (First in first out) Prevents deterioration and contamination of resins. Great color changeability. 2. Wide Selection Without Tip Heater: Higher cost performance ratio. Suitable for Thin wall and High cycle. With Tip Heater: High Performance. Suitable for Translucent, Thick wall, and Changing color. 3. "Steady Brace" system on the valve pins. Prevents the gate and pin from wear and tear or damage. 4. Easy adjustment Fine adjustment and change of the valve pin can be done on the molding machine. Specification 1. Body Heater: 200 to 240V (AC) 2. Tip Heater : 11V (AC) 3. Controller : Exclusive SH Controller Exclusive S2000 controller (with tip heater) * Consult us for the compatibility of the other manufacture's controller. 4. Drive Force : Air Pressure System (5kg

SVY High Performance Valve System Technical Data Color Changeability Test Condition: Resins in Hot Runner: 80g (Approx.) Product Weight : 23g / @ (Approx.) Changing the color of the hot runner when the color change of the cylinder is completed. From Black to Gray 1st Shot Most of the resins (black) inside the manifold and probe were ejected. Some of the resins remaining in the probe were ejected. Almost no resins remained. (Changing the color to gray is completed.) Tip Heater improves the process for changing color. Performance Report Resins PP PP PP PS PS HiPS GP-PS ABS ABS PC PC PC PC PC PET...