Piston (30mm dia.) Cylinder liner Manifold Sleeve Valve body Spacer block 120mm Back plate Cavity plate 1. This new compact valve gate system realizes thin stationary side height of 120mm, being applicable to 15t―50t of machine’s clamping force capacity. 2. Applicable to super engineering plastic molding. 3. It is equipped with a tip heater as its standard function, which facilitates the optimum molding condition for molding such as filler-contained plastics. 4. The combination of its air drive system and guiding mechanism prevents the gate and the pin from wear and tear or damage. 5. Air drive system provides easy handling and maint

3. Overall length of body: 45mm (limited) 5. Applicable controller: S2000 • AHC controller (Other manufacturers’ controllers are not applicable because of their unmatched body heater output voltage.) 6. Valve activation: air-driven (0.5Mpa) Design example using SMV <Seiki’s trial mold> Part size Gate size < Seiki’s trial mold >

Case examples resin resin temp. mold temp. SIVERAS （GF + filler 35％） FORTRON (GF40%） TORELINA (GF40%） Panlite Delrin