*mydirectindustry

SA-FC-LCO2S

Product catalog summary

Overview: The document describes the FLEX SERIES Layout Module, specifically designed for use at the entrance of reflow ovens. It features an adjustable speed conveyor to match the oven's requirements.

Specifications:

The module consists of two segments, with lengths ranging from 1,000 mm (500+500 mm) to 2,000 mm (1,000+1,000 mm), with a standard length of 1,200 mm.
Transport speed is set at 200 mm/sec.
Transport height is 950 mm +/- 25 mm.
Component clearance is 50 mm on top and 30 mm at the bottom, with an option for 80 mm clearance.
PCB edge space is a minimum of 3 mm.
Transfer direction is left to right, with the operating side at the front of the machine.
Fixed rail is located at the front of the machine.
Interface is SMEMA standard with optional extensions for Fuji, Panasonic, Sanyo, Siemens, SMPI, and special configurations.
SMEMA cable length is 3 meters.

Panel Dimensions:

Length ranges from a minimum of 80 mm to a maximum of 510 mm.
Width ranges from a minimum of 85 mm to a maximum of 390 mm, with an optional width of up to 460 mm.
Thickness ranges from 0.8 mm to 4.0 mm.
Maximum PCB weight is 2 kg.

General Features:

All modules are ESD compliant and CE marked.
Each module has an independent control system.
Technical specifications may change without notice.
Power supply is 230V 50Hz 1+N+T, with a current of 2 Ampere.
Air supply is 0.6 Mpa.
Weight is 70 kg.
Dimensions are 600x781x1,172 mm.
Color is RAL 7035.
Frame is made of aluminum profiles.

Additional Information: The document emphasizes that imagery is for illustration purposes only and advises consulting a local Seica Automation distributor for more information.

Catalog excerpts

FLEX SERIES LINKING CONVEYOR – INFEED/OUTFEED OVEN Linking Conveyor Outfeed 2 Segment Used at the entrance of the oven and comes with an adjustable speed conveyor, this allows the unit to match the reflow oven. The module is composed of two segment from 1.000mm(500+500mm) up to 2.000 mm (1.000+1.000mm) Standard 1.200mm. Standard Linking Conveyor include:  Cover (without micro switch)  Transport speed 200 mm/sec Imagery for illustration purposes only. Please consult your local Seica Automation distributor for more information. Layout Module

Open the catalog to page 1

FLEX SERIES GENERAL FEATURES TRANSPORT POWER SUPPLY: CURRENT: AIR SUPPLY: designWEIGHT: VARIOUS: • CE safety compliant • PLC microprocessor driven system • Automatic Width Adjust as option • Single piece aluminium rails, propr DIMENSION LxWxH: COLOR: FRAME: All modules are ESD compliant and CE marked, each module has an independent control system. Technical specification may change without any advanced notice. Seica Automation s.r.l Via Arturo Toscanini, 50-52 20831 Seregno (MB) ITALY P.iva / C.F. 11044290010

Open the catalog to page 2

SA-FC-LCO2S

SA-FC-LCO2S

Catalog excerpts

All Seica Automation S.r.l. catalogs and technical brochures