*mydirectindustry

SA-FC-LCI2S-

Product catalog summary

Overview: The document describes the Linking Conveyor Inspection-2 Segment Infeed Oven Function, which is used at the exit of an oven. It features an adjustable speed conveyor that matches the speed of the reflow oven and stops the PCB at the end for inspection. The module consists of two segments, each 600 mm in length, totaling 1,200 mm.

Standard Features: The standard linking conveyor includes a cover (without a micro switch) and a transport speed of 200 mm/sec. Imagery is for illustration purposes only, and further information can be obtained from local Seica Automation distributors.

General Features of FLEX Series:

Transport: Height is 950 mm +/- 25 mm, with component clearance of 50 mm on top (80 mm on request) and 30 mm at the bottom (80 mm on request). The PCB edge space is a minimum of 3 mm, with a left-to-right transfer direction and operation from the front of the machine. It includes a fixed rail at the front and an interface that is SMEMA standard with extended options for Fuji, Panasonic, Sanyo, Siemens, SMPI, and special SMEMA cable length of 3 m.
Panel Dimension: Length ranges from 80 mm to 510 mm, width from 85 mm to 390 mm, with an optional width up to 460 mm on request. Thickness ranges from 0.8 mm to 4.0 mm, and the maximum PCB weight is 2 Kg.
Various: Power supply is 230V 50Hz 1+N+T or 50 Hz 1+N+T, CE safety compliant, PLC microprocessor-driven system, optional automatic width adjust, automatic control of limit reached, single-piece aluminum rails with proprietary design. Current is 2 Ampere, air supply is 0.6 Mpa, weight is 70 Kg, and dimensions are 600x781x1,172 mm. The color is RAL 7035, and the frame is made of aluminum profiles.

Compliance and Contact Information: All modules are ESD compliant and CE marked, with each module having an independent control system. Technical specifications may change without notice. For more information, contact Seica Automation s.r.l at [email protected] or [email protected], located at Via Sardegna, 4 20841 Carate Brianza (MB) ITALY. Phone: +39 0362 15 72 717.

Catalog excerpts

FLEX SERIES LINKING CONVEYOR – INFEED/OUTFEED OVEN Linking Conveyor Inspection-2 Segment Infeed Oven Function Used at the exit of the oven and comes with an adjustable speed conveyor, this module matches the speed of the conveyor to the speed of the reflow oven and stops PCB at the end of the conveyor to inspect it. The module is composed of 2 segments of 600 mm (Total length = 1.200 mm). Standard Linking Conveyor include:  Cover (without micro switch)  Transport speed 200 mm/sec Imagery for illustration purposes only. Please consult your local Seica Automation distributor for more information. Layout Module

Open the catalog to page 1

FLEX SERIES GENERAL FEATURES TRANSPORT Height: Component clearance: Top 50 mm (80 mm on request) Bottom 30 mm (80 mm on request) Transfer direction: Operating side: Fixed Rail: SMEMA standard extended SMEMA Optional Fuji, Panasonic, Sanyo, Siemens, SMPI, Special SMEMA cable length: PANEL DIMENSION Length: Optional width: POWER SUPPLY: DIMENSION LxWxH: Aluminium profiles CE safety compliant PLC microprocessor driven system Automatic Width Adjust as option Automatic control of limit reached Single piece aluminium rails, proprietary design All modules are ESD compliant and CE marked, each module...

Open the catalog to page 2

SA-FC-LCI2S-

SA-FC-LCI2S-

Catalog excerpts

All Seica Automation S.r.l. catalogs and technical brochures