MODULO PF—PCI

PRESS FIT CONNECTOR INSERTION Press-fit pin and plated through hole (PTH) summarize together to a press-fit system. The functionality of such a system is dependent of the properties / characteristics of both of the components and their interactions. The press-fit technology is widely applied in multiple automotive applications. Various customers are using press-fit technology in a great variety of convenient, assistance and safety applications demonstrating the high acceptance of press-fit products and the press-fit termination technology itself. The principle for a press-fit connection is that...

PROCESS OPTIMISATION The advantage of servo presses: Different connector types have different heights. A servo press can be programmed, depending the connector height. With a pneumatic press, the height has to be adjusted or compensated mechanically which could be complex. When you have a mix of connector types with different heights, a servo press is a must. Force insertion modes: Connectors can be inserted in different controlled ‘modes’. The servo presses have a closed loop force and distance measurement system. The state-of-the-art ‘Delta force mode’ can even detect when the connector housing...

QUALITY THROUGH PROCESS CONTROL Features • Superior process control behavior compared to conventional NC axes - quick - repeatable - up to 1200 pins - up to 7,5 tons - can be optimized for your application • Intelligent compensation - due to calculation of individual tolerances of the parts - of system elasticities (dynamic bending compensation) • Free positioning with changing process forces - without fixed tool stop - resolution in 1/100 mm range • Real time evaluation - true close-loop control - direct reaction to process and quality data - no delay caused by low process data transfer - immediate...