Rotor units RUF 122 - 242 The desiccant SSCR or D-Max rotor Geared drive motor with chain transmission Stainless steel chassis Sector seals These high quality desiccant units are specially designed for building into customised air handling systems where a standard dehumidifier does not fit or match your specifications. Using the silica gel rotor unit, complete air handling systems can be designed and manufactured to conform to almost any specification. The RUF rotor units are built on an anodised aluminium frame with inner panels of stainless steel. Rotor rotation is via a self tensioning c h a i n drive and 3 phase motor/ gearbox. Choose between five rotors from Seibu Giken, all with unique qualities: D-Max - rotor sizes up to Ø 122 SSCR-U - rotor sizes from Ø 152 D-Max H - bactericidal & hygienic D-Max CI - silicon free rotor SZCR - zeolite rotor for low dew points

The rotor unit operates using one of these two dehumidification principles. See other data sheets for smaller airflows (RU-060 -102). Optional: other rotor configurations Techincal data RUF Nominal airflow* [m³/h] TECHNICAL DATA Model: Recusorb / Consorb * At nominal airflow and 20°C / 60%RH. Recusorb: Process-sector 60 % , Heat recovery sector 15 %, Reg. sector 25% Consorb 75/25: Process-sector 75% , Reg-sector 25% Consorb 60/40: Process-sector 60% , Reg-sector 40% Width Heat recovery sector Mounted panel is optional Proc. sector Airflow going into rotor Airflow coming out of rotor For detailed...