Dehumidifier RL-71

Product catalog summary

Overview: The Recusorb RL-71 series dehumidifiers, including models RL-71, RL-71 ICE, and RL-71LR, are designed for excellent performance across various climates. They feature built-in heat recovery, duct connections, and a stainless steel chassis. The rotor is washable, enhancing efficiency in moisture adsorption.

Specifications:

Dehumidifying capacity at 20°C / 60%RH: 13 - 17 kg/h
Dry air flow: 2500 - 3200 m³/h
Wet air flow: 800 - 1000 m³/h
Static pressure at disposal: 200 - 400 Pa
Heater power: 17 - 24 kW
Maximum electric consumption: 20.3 - 28.1 kW
Supply fuse: 3 x 400V 50Hz, 50 - 63 A
Weight: 190 - 196 kg

Features:

Possible built-in options include frequency inverters, M5 and F7 filters, linear control of the heater, and condensation insulation.
The rotor from Seibu Giken has a high number of channels for efficient moisture adsorption.

Performance: The dehumidifiers are equipped to handle varying relative humidity levels, with performance graphs indicating capacity changes with temperature and humidity variations.

Technical Data: The document provides correction diagrams for capacity calculations under different inlet conditions and specifies dimensions for duct connections.

Contact Information: Seibu Giken DST AB, Avestagatan 33, SE-163 53 Spånga, Sweden. Tel: +46 8 445 77 20, Fax: +46 8 445 77 39, Website: www.dst-sg.com, Email: [email protected]

Catalog excerpts

Dehumidifier Recusorb 2500 - 3200 m³/h Excellent performance in all climates Built-in heat recovery Duct connections Stainless steel chassis Washable rotor Possible built-in options: • Frequency inverters Linear control of the heater Condensation insulation Section of a dehumidifier rotor from Seibu Giken. The high number of channels means that moisture is adsorbed with extra efficiency!

Open the catalog to page 1

Dehumidifier model Static pressure at disposal (Pa) Static pressure at disposal (Pa) TECHNICAL DATA Maximum electric consumption (kW) Wet air Regen. air Dry air Rotor motor Valid for inlet conditions 20°C/ 60%RH. For other inlet conditions the capacity can be calculated by using the correction diagrams shown below. Volume flow for density 1.20 kg/m3. Available with electric heater or steam heater. CORRECTION DIAGRAM Subject to change without notice. Download installation drawing at www.dst-sg.com

Open the catalog to page 2

Dehumidifier RL-71

Dehumidifier RL-71

Catalog excerpts

All Seibu Giken DST AB catalogs and technical brochures