Dehumidifier R-51/61R

Product catalog summary

Overview: The document provides technical specifications and operational details for the Recusorb R-51R and R-61R dehumidifiers. These models feature a washable rotor, no desiccant carry-over, a stainless steel chassis, built-in heat recovery, and low dry air temperature, ensuring a long lifetime.

Specifications:

Dehumidifying capacity at 20°C / 60%RH: 7.3 - 10 kg/h
Dry air flow: 1250 - 1450 m³/h
Static pressure at disposal: 100 Pa for dry air, 300 Pa for wet air (R-51R), 200 Pa for wet air (R-61R)
Heater power: 9 kW (R-51R), 13.5 kW (R-61R)
Maximum electric consumption: 10.3 kW (R-51R), 14.8 kW (R-61R)
Supply fuse: 32/25 A (R-51R), 40/25 A (R-61R)
Weight: 105 kg (R-51R), 110 kg (R-61R)

Operational Details:

The dehumidifying capacity is calculated using a correction factor from a diagram for conditions other than 20°C/60%RH.
The temperature of the dry air at nominal air flow is calculated using specific formulas for each model.

Design Features:

High number of channels in the rotor for efficient moisture adsorption.
Available with electric or steam heater options.

Contact Information: Seibu Giken DST AB, Avestagatan 33, SE-163 53 Spånga, Sweden. Tel: +46 8 445 77 20, Fax: +46 8 445 77 39, Website: www.dst-sg.com, Email: [email protected]

Catalog excerpts

Dehumidifier Recusorb 1250 - 1450 m³/h Washable rotor No desiccant carry-over Stainless steel chassis Built-in heat recovery Low dry air temperature Long lifetime Section of a dehumidifier rotor from Seibu Giken. The high number of channels means that moisture is adsorbed with extra efficiency!

Open the catalog to page 1

Static pressure at disposal (Pa) Static pressure at disposal (Pa) TECHNICAL DATA Dehumidifier model Heater power3 (kW) Maximum electric consumption (kW) Wet air Regen. air Dry air Rotor motor CORRECTION DIAGRAM Valid for inlet conditions 20°C/ 60%RH. For other inlet conditions the capacity can be calculated by using the correction factor from the diagram shown below. Volume flow for density 1.20 kg/m3. Available with electric heater or steam heater. The temperature of the dry air at nominal air flow is calculated by: R51: tout = tin + ( K x 15) + 3 R61: tout = tin + ( K x 17) + 3 The dehumidifying...

Open the catalog to page 2

Dehumidifier R-51/61R

Dehumidifier R-51/61R

Catalog excerpts

All Seibu Giken DST AB catalogs and technical brochures