RECUSORB R-060BR Dehumidifying capacity at 20°C / 60%RH 1000 m³/h Built-in heat recovery Low dry air temperature Long lifetime Washable rotor No desiccant carry-over Stainless steel chassis Section of a dehumidifier rotor from Seibu Giken. The high number of channels means that moisture is adsorbed with extra efficiency!

TECHNICAL DATA Dehumidifier model Static pressure at disposal Static pressure at disposal Maximum electric consumption (kW) Wet air Regen. air Dry air Rotor motor Valid for inlet conditions 20°C/ 60%RH. For other inlet conditions the capacity can be calculated by using the correction factor from the diagram shown below Volume flow for density 1.20 kg/m3. Volume flow for density 1,20 kg/m3. Freeblowing. CORRECTION DIAGRAM The temperature of the dry air at nominal air flows is calculated by: tout = tin + ( K x 10) + 5 The dehumidifying capacity is estimated as the nominal capacity from above, multiplied...