Dehumidifier DR-31 T10

Product catalog summary

Overview: The Recusorb DR-31 T10 is a dehumidifier designed for efficient moisture removal, featuring a washable rotor and a stainless steel chassis. It is equipped with a self-regulating heater and is easy to maintain, promising a long operational lifetime.

Specifications:

Dehumidifying Capacity: 1.6 kg/h at 20°C / 60% RH
Dry Air Flow: 310 m³/h
Static Pressure: 350 Pa
Wet Air Flow: 110 m³/h
Heater Current: 8 A
Maximum Electric Consumption: 2.1 kW
Supply Fuse: 230V / 50Hz, 10 A
Weight: 28 kg

Technical Features:

The rotor from Seibu Giken has a high number of channels for efficient moisture adsorption.
The PTC heater design allows power regulation by controlling the wet air flow.
The dry air temperature at nominal air flows is calculated using the formula: tout = tin + (K x 17) + 3, where K is a factor from the correction diagram.

Design and Dimensions:

Process Air Inlet: Ø160 mm
Dry Air Outlet: Ø160 mm
Wet Air Outlet: Ø80 mm

Additional Information: The dehumidifier's capacity can be adjusted for different inlet conditions using a correction factor. Installation drawings are available for download at the manufacturer's website.

Catalog excerpts

Dehumidier Recusorb 310 m³/h Washable rotor No desiccant carry-over Stainless steel chassis Self-regulating heater Easy to maintain Long lifetime Section of a dehumidier rotor from Seibu Giken. The high number of channels means that moisture is adsorbed with extra efciency!

Open the catalog to page 1

Heater Rotor TECHNICHAL DATA Dehumidier model Static pressure at disposal (Pa) Maximum electric consumption (kW) Rotor motor CORRECTION DIAGRAM Valid for inlet conditions 20°C / 60% RH. For other inlet conditions the capacity can be calculated by using the correction factor from the diagram shown below. Volume ow for density 1.20 kg/m3. Volume ow for density 1.20 kg/m3. Free blowing. The design of the PTC heater enables the power to be regulated by controlling the wet air ow. The temperature of the dry air at nominal air ows is calculated by: tout = tin + ( K x 17) + 3 The dehumidifying capacity...

Open the catalog to page 2

Dehumidifier DR-31 T10

Dehumidifier DR-31 T10

Catalog excerpts

All Seibu Giken DST AB catalogs and technical brochures