Dehumidifier CZ series

Product catalog summary

Overview: The Consorb CZ-82/102/102L/104 dehumidifiers are designed for high efficiency and long-term use, featuring a washable rotor and no desiccant carry-over. They are suitable for environments with high ambient water content and offer excellent deep drying capabilities. An optional hot-water coil is available for regeneration air pre-heating.

Specifications:

Dehumidifying capacity at 20°C / 60% RH ranges from 22 to 65 kg/h.
Dry air flow ranges from 3200 to 8000 m³/h.
Models include CZ-82, CZ-102, CZ-102L, and CZ-104.
Nominal capacities are 22, 36, 50, and 65 kg/h respectively.
Static pressure for dry and wet air flow is 200 Pa.
Heater power ranges from 30 to 95 kW.
Maximum electric consumption ranges from 34.1 to 106.5 kW.
Supply fuse requirements are 63, 100, 160, and 200 A for each model.
Weights range from 600 to 900 kg.

Technical Data:

Volume flow is calculated for a density of 1.20 kg/m³.
Electric reactivation heater is standard; steam and hot water options are available.
The dehumidifying capacity is adjusted using a correction factor (K) from a provided diagram.
The temperature of the dry air is calculated using the formula: tout = tin + (K x 14) + 5.

Design Features:

The rotor section from Seibu Giken features a high number of channels for efficient moisture adsorption.
Dimensions and connection sizes vary across models, with specific measurements provided for each.

Contact Information: Seibu Giken DST AB, Avestagatan 33, SE-163 53 Spånga, Sweden. Tel: +46 8 445 77 20, Fax: +46 8 445 77 39, Website: www.dst-sg.com, Email: [email protected]

Catalog excerpts

Dehumidifer Consorb 3200 - 8000 m³/h Washable rotor No desiccant carry-over Suitable for high ambient water contents Long lifetime Excellent deep drying ability Option: hot-water coil for regeneration air pre-heating Section of a dehumidifier rotor from Seibu Giken. The high number of channels means that moisture is adsorbed with extra efficiency!

Open the catalog to page 1

Dehumidifier model Nominal capacity (kg/h) CORRECTION DIAGRAM TECHNICAL DATA Heater Rotor Rotor motor Valid for inlet conditions 20°C/ 60% RH. For other inlet conditions the capacity can be calculated by using the diagram shown below. Volume flow for density 1.20 kg/m³. Electric reactivation heater is standard. Steam and hot water is optional. The temperature of the dry air at nominal air flows is calculated by: tout = tin + ( K x 14 ) + 5 The dehumidifying capacity is estimated as the nominal capacity from above, multiplied by factor K from the correction diagram.

Open the catalog to page 2

Dehumidifier CZ series

Dehumidifier CZ series

Catalog excerpts

All Seibu Giken DST AB catalogs and technical brochures