1. Catalogs
  2. Seibu Giken DST AB
  3. Dehumidifier Consorb DC-5
video corpo

Dehumidifier Consorb DC-5

Dehumidifier Consorb DC-5

Dehumidifier Consorb DC-5

Product catalog summary
Overview: The DC-5 is a dehumidifier model from Seibu Giken DST AB, designed for efficient moisture removal with a capacity of 0.5 kg/h and a dry air flow rate of 120 m³/h. It operates effectively within a wide temperature range from -20°C to +55°C.
Specifications:
  • Dehumidifying capacity: 0.5 kg/h at 20°C / 60% RH
  • Dry air flow: 120 m³/h
  • Temperature range: -20°C to +55°C
  • Weight: Low, easy to place and maintain
  • Construction: Stainless steel chassis, washable rotor, no desiccant carry-over
  • Heater: Self-regulating, power regulated by controlling wet air flow
Design Features:
  • High-efficiency moisture adsorption due to a high number of channels in the rotor
  • Stainless steel chassis for durability
  • Easy maintenance and long lifetime
Technical Data:
  • Process air inlet: Ø125 mm
  • Dry air outlet: Ø100 mm
  • Wet air outlet: Ø50 mm
  • Regeneration air inlet: Ø80 mm
  • Heater current: Regulated by wet air flow
  • Total power: Specified for 230V / 50Hz supply
Additional Information: The document includes a dimension drawing and technical data, emphasizing the importance of not reproducing or transmitting the document without permission from DST Seibu Giken. For further details, installation drawings can be downloaded from their website.
See more

Catalog excerpts

Dehumidifier Consorb DC-5-1

Dehumidifier Consorb Dehumidifying capacity at 20°C / 60%RH 0.5 kg/h Dry air flow 120 m³/h Wide temperature range: -20°C to +55°C Easy to place Low weight Washable rotor No desiccant carry-over Stainless steel chassis Self-regulating heater Easy to maintain Long lifetime Section of a dehumidifier rotor from Seibu Giken. The high number of channels means that moisture is adsorbed with extra efficiency. World leaders in dehumidification

 Open the catalog to page 1
Dehumidifier Consorb DC-5-2

TECHNICAL DATA S&UTiwitfi Dehumidifier model 1. Valid for inlet conditions 20°C / 60%RH. 2. Volume flow for density 1.20 kg/m3. 3. The design of the PTC heater enables the power to be regulated by controlling the wet air flow. PRINCIPLEDIMENSIONS Subject to change without notice. Download installation drawing at www.dst-sg.com

 Open the catalog to page 2
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.