Dehumidifier Consorb DC-20 / 30 T10, T16

Product catalog summary

Overview: This document provides technical specifications and details for the DC-20 and DC-30 dehumidifier models, including T10 and T16 variants. These models are designed for efficient moisture removal with a focus on durability and ease of maintenance.

Specifications:

Dehumidifying Capacity: 1.1 - 1.5 kg/h at 20°C / 60% RH.
Dry Air Flow: 310 - 400 m³/h.
Construction: Stainless steel chassis with a washable rotor and a protected control panel.
Heater: Self-regulating PTC heater that adjusts power based on wet air flow.
Design Features: Fold-flat handle for portability and easy access to filters.

Technical Data:

Nominal Capacity: Varies by model, with specific values provided for different inlet conditions.
Static Pressure: Detailed for both dry and wet air flows.
Power Requirements: Includes heater current and total power consumption.
Weight: Ranges from 31 to 32 kg depending on the model.

Performance: The dehumidifiers are equipped with a high-efficiency rotor from Seibu Giken, featuring numerous channels for enhanced moisture adsorption. The performance can be adjusted using correction factors based on varying inlet conditions.

Additional Information: The document includes a correction diagram for capacity adjustments and notes that specifications are subject to change. Installation drawings can be downloaded from the provided website.

Catalog excerpts

Dehumidifier Consorb DC-20 / 30 T10, T16-1

Dehumidifier Consorb Dehumidifying capacity at 20°C / 60%RH 1.1 - 1.5 kg/h Dry air flow 310 - 400 m³/h Washable rotor Protected control panel Stainless steel chassis Self-regulating heater Fold-flat handle Long lifetime Easy access to filter Section of a dehumidifier rotor from Seibu Giken. The high number of channels means that moisture is adsorbed with extra efficiency. World leaders in dehumidification.

Open the catalog to page 1

Dehumidifier Consorb DC-20 / 30 T10, T16-2

Dehumidifier model CORRECTION DIAGRAM 1. Valid for inlet conditions 20°C/60%RH. For other inlet conditions the capacity can be calculated by using the correction factor from the diagram shown below. 2. Volume flow for density 1.20 kg/m3. 3. The design of the PTC heater enables the power to be regulated by controlling the wet air flow.

Open the catalog to page 2

Dehumidifier Consorb DC-20 / 30 T10, T16

Dehumidifier Consorb DC-20 / 30 T10, T16

Catalog excerpts

All Seibu Giken DST AB catalogs and technical brochures