Dehumidifier A-30B/Bp

Product catalog summary

Overview: The Aquasorb A-30B/Bp dehumidifier is designed for efficient moisture removal, operating effectively at dew points below 0°C. It features a washable rotor and a stainless steel chassis, with an optional dry air connection.

Specifications:

Dehumidifying capacity: 0.5 kg/h at 20°C / 60% RH
Dry air flow: 400 m³/h
Static pressure: 0 Pa for A-30B, 200 Pa for A-30Bp
Heater power: 1 kW
Maximum electric consumption: 1.20 kW for A-30B, 1.22 kW for A-30Bp
Supply fuse: 230V / 50Hz, 10 A
Weight: 32 kg

Features:

Includes a trolley, condensate collector, and dry air spigot
Control equipment for efficient operation
High-efficiency moisture adsorption due to a high number of rotor channels

Technical Data: The dehumidifying capacity can be adjusted using a correction factor based on inlet conditions. The temperature of the dry air is calculated by adding 9°C to the inlet temperature.

Diagram and Calculations: A correction diagram is provided to adjust the dehumidifying capacity for different inlet conditions. The nominal capacity is multiplied by a factor K from this diagram.

Contact Information: Seibu Giken DST AB, Avestagatan 33, SE-163 53 Spånga, Sweden. Tel: +46 8 445 77 20, Fax: +46 8 445 77 39, Website: www.dst-sg.com, Email: [email protected]

Catalog excerpts

Dehumidifier Aquasorb 400 m³/h Washable rotor Dry air connection (optional) Operates at dew-points below 0°C Condenses out the moisture Stainless steel chassis All energy accumulates in the dry air Useful options: Trolley Condensate collector Dry air spigot Control equipment Section of a dehumidifier rotor from Seibu Giken. The high number of channels means that moisture is adsorbed with extra efficiency!

Open the catalog to page 1

Static pressure at disposal (Pa) TECHNICAL DATA Dehumidifier model Maximum electric consumption (kW) Rotor Rotor motor Condensate outflow 1 Valid for inlet conditions 20°C / 60% RH. For other inlet conditions, the capacity can be calculated by using the correction factor from the diagram shown below. 2 Volume flow for density 1.20 kg/m³. CORRECTION DIAGRAM The temperature of the dry air at nominal air fl ows is calculated by: tout = tin + 9 The dehumidifying capacity is estimated as the nominal capacity from above, multiplied by factor K from the correction diagram. Dry air outlet (A-30Bp Ø125)...

Open the catalog to page 2

Dehumidifier A-30B/Bp

Dehumidifier A-30B/Bp

Catalog excerpts

All Seibu Giken DST AB catalogs and technical brochures