• Pneumatic screw feeding through calibrated flexible tubing.
• Special elastic clamp guide-heads for screws, independent of the screwdriver movement.
• Long-lasting pneumatic motors with automatic disengagement clutch for high-quality screwing.
• Horizontal, inclined, or oriented screwing capabilities.
• Quick torque adjustment and precise screwing depth regulation.
• Adjustable mechanical axial compensation and hydraulic brake for screwing speed control.
• Durable guide-based advancement unit with self-lubricating ball bearings.
• Standard axis distance between 20 and 120 mm, adjustable as needed.
• Maximum adjustable total stroke and approach stroke to the piece.
• Maximum advance cylinder thrust of 48 Kg at 6 bars.
• Easy maintenance.
• Power supply: 220v-50 Hz.
• Minimum constant pneumatic supply: 6 bars.
• Pneumatic consumption: 15 to 30 l/cycle (depending on screw).
• Production rate: 20 to 60 cycles/min (depending on application).

• Unit without support and without electropneumatic installation.
• Unit without support and with solenoid valves.
• Complete unit with support and solenoid valves.

• Motor with torque transducer.
• DC electric motor.
• Electric motor with torque and angle control.
• Various screwing motors.
• Higher torque.
• Anti-tip screw head.
• 90º clamp head.
• Greater approach stroke.
• Automatic axis distance variation.
• Cardan joint for small axis distance.
• Different spindle positions relative to the support.
• 60 Hz frequency.
• Expulsion of non-screwed screws.
• Two-screw feeder group.
• Soundproofed vibrator.
• Loading hopper with level detector.
• Electronic screwing cycle controller.
• Cycle start by bimanual operation.
• Various solenoid valve models.
• Complete electro-pneumatic installation.
• Standard or special supports.
• Table with workpiece holder.
• Complete workstation according to needs.
• Multiple units up to 6 spindles.
• Special units for screws of various dimensions.
• Units for nut screwing.

Note: Dimensions may vary based on the approach stroke.