Industrial Network Unit INU User Manual Linux USB Deviceserver INU-100

Manufacturer & Contact SEH Computertechnik GmbH Suedring 11 33647 Bielefeld Germany Phone: +49 (0)521 94226-29 Fax: +49 (0)521 94226-99 Support: +49 (0)521 94226-44 Email: [email protected] Web: https://www.seh-technology.com Document Type: User Manual Title: INU User Manual Linux Version: 1.2 | 2021-07 Legal Information SEH Computertechnik GmbH has endeavored to ensure that the information in this documentation is correct. If you detect any inaccuracies please inform us at the address indicated above. SEH Computertechnik GmbH will not accept any liability for any error or omission. The information...

INU User Manual Linux

INU User Manual Linux 6.8 6.9

INU User Manual Linux General Information Product  2 Documentation  4 Support and Service  5 Your Safety 

INU User Manual Linux General Information 1.1 Product Purpose INU servers integrate non-network-ready USB devices (e.g. USB sensors, USB cameras, etc.) into an industrial environment via TCP/IP network. For this purpose, the USB devices will be connected to the USB ports of the INU server. Then the UTN (UTN = USB to Network) functionality and the corresponding software tool 'SEH UTN Manager' establish a virtual USB connection between USB device and client. The USB device can be used as if it were connected locally. In addition, a load can be connected to and then used via the relay of the INU...

INU User Manual Linux General Information Combination with Associated Products You can combine the INU server with additional SEH Computertechnik GmbH products to ideally adapt the use of your devices to your environment! Industrial Solution 'IH-304 USB Hub' The industrial solution IH-304 is a USB hub with four USB 3.0 ports. If it is connected to the INU server, up to four USB devices can be used per INU server USB port. This is a most efficient solution for control cabinets with little space. The IH-304 must be purchased separately. Detailed information: https://www.seh-technology.com/products/industrial-solutions/ih-304.html...

INU User Manual Linux General Information 1.2 Documentation Please load all current documents from our Website: https://www.seh-technology.com Further applicable documents Thee INU documentation consists of the following documents: Hardware Installation Guide Quick Installation Guide User Manual Online help Information on safety, technical data, hardware installation and declarations of conformity Description of initial setup Detailed description of the INU server configuration, administration and maintenance. System-specific instructions for the following systems: - Windows - macOS - Linux Information...

INU User Manual Linux General Information 1.3 Support and Service SEH Computertechnik GmbH offers extensive Support. If you have any questions, please contact us. Monday through Thursday Friday +49 (0)521 94226-44 [email protected] Customers from the United States of America (USA) and Canada please contact North American Support: Monday – Friday +1-610-933-2088 [email protected] All information and downloads regarding your product is available on our website: https://www.seh-technology.com

INU User Manual Linux General Information 1.4 Your Safety Read and observe all safety regulations and warnings found in the documentation, on the device and on the packaging. This will avoid potential misuse and prevent damages to people and devices. Intended Use The INU server is used in TCP/IP networks and has been designed for use in industrial environments. It allows network users to access non-network-ready USB devices. In addition, a load can be connected to and then used via the relay of the INU server. Improper Use All uses of the device that do not comply with the functionalities described...

INU User Manual Linux General Information 1.5 First Steps 1. Read and observe the security regulations in order to avoid damages to people and devices  6. 2. Install the hardware. The hardware installation includes connecting the INU server to the network, USB devices, and power grid  ‘Hardware Installation Guide‘. 3. Install the software. The software installation includes installing the required software tool 'SEH UTN Manager' on your client and assigning an IP address  ‘Software Installation Guide‘. 4. Configure the INU server so that it is optimally embedded it into your network and...

INU User Manual Linux Administration Methods 2 Administration Methods You can administer, configure and maintain the INU server in a number of ways: • Administration via INU Control Center  9 • Administration via the SEH UTN Manager  11 • Administration via Ema

INU User Manual Linux Administration Methods Administration via INU Control Center The INU server has a user interface, the INU Control Center which can be opened in an Internet browser (e.g. Mozilla Firefox). The INU server can be configured, monitored and maintained via the INU Control Center. • Open INU Control Center in Browser  9 • INU Open Control Center via SEH UTN Manager  9 • Controls  10 Open INU Control Center in Browser  The INU server is connected to the network and the power grid.  The INU server has a valid IP address  21. 1. Open your browser. 2. Enter the IP address...

INU User Manual Linux Administration Methods Menu item Submenu items Page Product & Company Sitemap Flags ? icon After selecting a menu item (simple mouse click), the available submenu items are displayed to the left. After selecting a submenu item, the corresponding page with its content is displayed. Menu content Manufacturer’s contact details and additional product information. Overview of and direct access to all pages of the INU Control Center. Language selection Online help

INU User Manual Linux Administration Methods The 'SEH UTN Manager' is a software tool developed by SEH Computertechnik GmbH. The SEH UTN Manager is used to establish and manage connections to the USB devices connected to the INU servers. • Features  11 • Versions  13 • Installation  13 • Program Start  17 Features The software is installed on all clients that are meant to access a USB device in the network. After the SEH UTN Manager is started, the network is scanned for connected INU servers. All INU servers found and their connected USB devices are displayed in the 'network list'. To...