ThinPrint® Gateway TPG-125 Quick Installation Guide Overview [en] This Quick Installation Guide provides a description of the installation of the TPG-125. It contains the following information: Dieser Quick Installation Guide beinhaltet eine Beschreibung der Installation des TPG-125. Sie erhalten die folgenden Informationen:  General Information  Safety Regulations  Hardware Installation  Software Installation  Getting Started  Configuring the ThinPrint®  Allgemeine Information  Sicherheitsvorschriften  Hardware-Installation  Software-Installation  Erste Schritte  ThinPrint® Gateway Please note the table of contents on page 3. Should you have any further questions, please contact our support hotline. Monday - Thursday Friday +49 (0)521 94226-44 Beachten Sie das Inhaltsverzeichnis auf Seite 15. Falls Sie noch Fragen haben, kontaktieren Sie unsere Support-Hotline.

Date of Manufacture The serial number includes the date of manufacture. The serial number can be found on the type plate. Quick Installation Guide

2 General Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Purpose . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Scope of Supply . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Technical Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 LED Display. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 2 Safety Regulations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 2 Hardware...

 General Information Purpose The ThinPrint® Gateway 'TPG-125' decompresses ThinPrint print jobs and sends them in a decrypted way to the relevant network printers. To this purpose, the TPG-125 contains a fully embedded ThinPrint Client. The TPG-125 allows you to embed up to twelve network printers into the network. The administration of the TPG-125 is done via the 'TPG Control Center'. Scope of Supply Please check the package content before getting started: Quick Installation Guide The Quick Installation Guide provides a brief description of the installation of the TPG-125. (This document) Power...

Technical Data 1) Network status LED (green) 2) Activity LED (green) 3) Server communication LED (green/orange/red) 4) Print status LED (green/orange/red) Front view 5) Network connector (RJ-45) for 1000BaseT, 100BaseTX and 10BaseT 6) USB port for the saving of parameters, buffering of print jobs, etc. 7) Status/reset button 8) Connector for the included power pack Rear view Network connector logical: physical: Device connection Current input - 400 mA @ 5 VDC (without USB device) - 1200 mA (with full load on the USB port) Operating environment - Ambient temperature: 5–40 °C - Relative humidity:...

LED Display The LEDs of the TPG-125 provide information about its status. LED Network status Server communication There is a connection to the network. There is no connection to the network. flashing at irregular intervals Indicates the exchange of network data packets. The Connection Service has not been configured. There is currently no communication with the ThinPrint server. The ThinPrint Connection Service has been configured and established. There is currently no communication with the ThinPrint server. A: The Connection Service has not been configured. Currently communication takes place...

Printers have been configured. The status and the messages of all printers could be queried. Printers have been configured. The status and the messages of some printers could be queried. orange/ green Printers have been configured. The status and the messages of some printers could be queried. Print jobs will be buffered for printers of which the status and messages could not be queried. Printers have been configured. No printer statuses and messages could be queried. Printers have been configured. No printer statuses and messages could be queried. All print jobs will be buffered. A: No printers...

 Safety Regulations TPGs are network devices for use in office environments. The TPG-125 is used in TCP/IP networks. Before starting the initial setup procedure and during the operation of the TPG, please note the following safety regulations. Their purpose is to protect yourself and others from personal injuries, and avoid damage to the equipment.  Read the documentation and make sure that your system meets the     requirements listed therein. Avoid contact with humidity or liquids. The device must only be connected and operated if it is in perfect condition. Make sure that no-one steps...

 Hardware Installation The TPG-125 supports communication between up to twelve network printers and ThinPrint servers. Proceed as follows: 1. Connect the network cable (RJ-45) to the TPG-125. 2. Connect the power cord to the TPG-125. Quick Installation Guide

 Finding the TPG-125 in the Network Once the TPG-125 is connected to the network, it checks whether an IP address can be obtained from the boot protocols BOOTP or DHCP. If this is not the case, the TPG-125 assigns itself an IP address via ZeroConf from the address range (169.254.0.0/16) which is reserved for ZeroConf. The 'InterCon-NetTool' has been developed by SEH Computertechnik GmbH for the administration of SEH devices. By means of this tool you can find the TPG125's IP address and, if necessary, assign a suitable IP address to the TPG-125, as described below.  ’Installing and Starting...

 After the InterCon-NetTool was started, it searches the network for existing devices and displays them in the 'device list'. Detailed information on how to use the InterCon-NetTool can be found in the Online Help. To start the Online Help, select Help – Online Help from the menu bar. Finding the TPG-125 (Determining the IP Address) All SEH devices found in the network are displayed in the device list. If the TPG-125 has received an IP address via the boot protocols BOOTP or DHCP, you can identify the TPG-125 with the help of it's type designation. If you are using several TPG-125 of the same...