VC_E.cdr tr.row {} td.cell {} div.block {} div.paragraph {}

Compressed Air & Gas Air/gas compressors Technical gases and CO² plants Chemical equipment and piping Pressure vessels/receivers and piping systems containing air or gases Thermal relief Rail Industry Medical gases Steam Autoclaves and sterilizers Breweries Clean steam Pharmaceutical industry Coffee machines Multi-purpose plants Steam boilers and plants Cryogenic Pressure vessels/receivers Cryogenics including oxygen and special gases Medical gas equipment Cryogenic compressor applications Container lorries and cryogenic trailers Industrial freezing Liquid Pumping systems and Hydraulic systems...

Compressed Air & Gas The Seetru 'GA' & 'GP' Range 1 The Seetru range of safety valves for compressed air and gas are compact, highly effi cient and incorporate the exclusive Tutchtite® seal technology for repeatable bubble-tight sealing performance: designed for applications including; air/gas compressors, specialist gas plants, chemical equipment and piping, pressure vessels, thermal relief and medical gases etc. These valves are manufactured in bronze, brass or stainless steel and offer a wide range of connections, for applications up to 250 °C. Manufactured in accordance with a wide range...

GP 646 (Clean Gas Service) From To Connections Tri-clamp® ½" x ¾" 1" x 1" Pressure range bar g. psi g. 0.48 6.98 55.20 800.40 Manufactured in stainless steel with a range of fi ne surface fi nishes for protection of installations in which clean service is required only on the inlet. Supplied with FDA compliant elastomer sealing with Tri-clamp® inlet and threaded outlet. Inlet Seat Body DN (Bore Size - mm) ST-STEEL ST-STEEL 10 • 13 Sealing Perfl uoroelastomer GP 331, 329, 636, 646, 656 From To Connections BSP & NPT ¼" x " 1½" x 2" Pressure range bar g. psi g. 0.30 4.35 370 5365 Available in brass,...

The Seetru 'SA' & 'SP' Range The Seetru range of safety valves for steam applications are compact and highly effi cient, designed with the exclusive Tutchtite® sealing technology offering repeatable bubble-tight sealing performance. Typical uses of these valves include autoclaves, pharmaceutical industry, vending machines, hot water boilers, steam boilers and plants as well as clean steam applications. Suitable for use up to 250 °C and minimum dryness factor of 0.97. Manufactured in accordance with a wide range of international standards and approvals such as TÜV (Germany) to AD Merkblatt A2,...

VC_E.cdr tr.row {} td.cell {} div.block {} div.paragraph {} .font0 { font:5.00pt "Arial", sans-serif; } .font1 { font:6.00pt "Arial", sans-serif; } .font2 { font:7.00pt "Arial", sans-serif; } .font3 { font:9.00pt "Arial", sans-serif; } .font4 { font:11.00pt "Arial", sans-serif; } .font5 { font:16.00pt "Arial", sans-serif; } .font6 { font:73.50pt "Palatino Linotype", serif; } .font7 { font:37.00pt "Tahoma", sans-serif; } SP 646 (Clean Steam Service) From To Connections Tri-clamp® V2" x %" 1" x 1" Pressure range bar g. 0.32 12 psi g. 4.64 174 II (0 Manufactured in stainless steel with a range of...

The Seetru 'CP' Range The Seetru range of safety valves for cyrogenic applications are built using Seetru sealing technology, suitable for temperatures down to -196 °C and available with PTFE or metal-to-metal sealing. These valves are used on pressure vessels, cryogenic plants including oxygen and special gases, cryogenic compressor applications, container lorry/cryogenic trailers, and industrial freezing. Manufactured in accordance with a wide range of international standards and approvals such as TÜV (Germany) to AD Merkblatt A2, National Board UV Stamp to ASME Section VIII Division 1, GOST/RTN...

VC_E.cdr tr.row {} td.cell {} div.block {} div.paragraph {} .font0 { font:5.00pt "Arial", sans-serif; } .font1 { font:7.00pt "Arial", sans-serif; } .font2 { font:9.00pt "Arial", sans-serif; } .font3 { font:11.00pt "Arial", sans-serif; } .font4 { font:16.00pt "Arial", sans-serif; } .font5 { font:17.00pt "Arial", sans-serif; } .font6 { font:73.50pt "Palatino Linotype", serif; } The Seetru 'QP'Range The Seetru range of safety valves for liquefied gas applications are manufactured to meet demanding applications which include; liquefied gas storage, gas testing systems, pressure vessels, pressure...

The Seetru 'RA' & 'RP' Range The Seetru range of safety valves for refrigeration applications are designed to meet the needs of the refrigeration industry, offering safety valve technology for compressor manufacturers, industrial refrigeration, commercial refrigeration, ice making systems and air conditioning. The valves are compact and designed with bonded sealing technology and the highest possible sealing performance to comply with most stringent enviromental standards. Each valve is leak tested to better than 10-5 mbar litres/sec on Helium. This is equivilent to a leakage rate of less than...

The Seetru 'LP' Range The Seetru range of safety valves for liquid applications has been designed to be compact and highly effi cient. The bubble-tight sealing performance makes these valves suitable for many liquid applications including; hydraulic systems, pumping systems, thermal relief, chemical storage, waste water management, oil transfer, petrochemical industry, fi re fi ghting equipment and water cooling systems. Suitable for temperatures up to 250 °C. The valves are GOST/RTN approved and comply with the requirements of Pressure Equipment Directive 97/2/EC (CE Marked). This range of valves...

Seetru Limited are internationally renowned manufacturers of pressure relief valves and liquid level gauges for a variety of industries, from compressors to ship building and power stations. Founded in 1949 with the aim of producing the fi nest liquid level gauges so that customers could see the true level even under the most severe conditions. This philosophy of making the fi nest through innovation continued with the inception of the Seetru range of pressure relief devices, circa 1950; the Seetru Tutchtite® sealing system revolutionized the safety valve market with valves that do not leak even...