Product group T.
6Pages

Here is your conveying solution:

T – Open hopper pumps Power divider for timing the paddle shafts, completely enclosed, with lubricating device. There are 9 ranges of open hopper pumps. They are used for viscous media that have only little or no flowability. T pumps have a feed hopper and an auger feed screw to positively feed the product into the pumping elements. Shaft sealing gland packing, alternatively with seal cage ring or grease chamber ring. Bridge breaker drive designed with a geared motor or variable speed drive in foot mounted design, with elastic coupling and guard. Pressure branch with gauge connection....

Feed hopper rectangular design, hopper length customised to meet special applications. Plug-in shaft connection for quick disassembly or repair of pump and drive, for quick replacement of the rotating parts and shaft seals; with plug-in shaft pin and splash ring seal to secure the plug-in shaft connection and additionally protect the bearing from contamination/gland leakage. Paddle shafts counter rotating to prevent bridging over the auger feed screw and for the metered addition and mixing of additives. Paddle shaft bearing in sealed design with lubricating device. Pump drive geared motors,...

Why open hopper pumps? Because they are used in applications such as agriculture, brewing industry and distilleries, ceramics industry, confectionery industry, construction, dewatered sludge treatment, dough processing and bakeries, dyeing and varnishing industry, electroplating, fish industry, fruit and vegetable processing, pharmaceutical and cosmetics industry, poultry and meat processing, oil, gas and petrochemical industry, shipbuilding, sludge dewatering, stock preparation, textile industry, waste water and sludge treatment, wood processing and wine industry. Features • These pumps...

Overview of ranges Pumps of the BTE range feature a rectangular feed hopper and a compression zone with an enlarged cross-section as well as an auger feed screw with a longer pitch and enlarged diameter. The length of the hopper opening is variable to suit the application conditions. Pumps of this range are used for pumping highly viscous to airtight products that do not tend to bridging. Range BTE Pumps of the BTI range feature a rectangular feed hopper with integrated bridge breaker. The compression housing is dismountable for service work. The length of the hopper opening is variable to...

Or visit www.seepex.com T 4.08E And what can we get flowing for you? Your nearest contact: