Product group D.
6Pages

Here is your conveying solution:

D – Dosing pumps The 6 ranges of dosing pumps can be used in virtually all industries for the metering and dosing of precise quantities. They are particularly good for low-pulsation conveying of low to high viscosity fluids, as well as media containing solids and those that are chemically aggressive. Stator adapter in stainless steel, enabling the use of all sizes of rotor/stator giving interchangeability with only one housing and drive unit. Rotor wear resistant and corrosion-proof materials. Tie rods and screw connections in stainless steel. Suction casing in stainless steel, 1"...

Plug-in shaft connection for easy dismantling of the pump and drive enabling quick replacement of the rotating parts and shaft seals. The plug-in shaft pin secures the shaft connection to the drive and the splash ring protects the bearing from contamination / gland leakage. Shaft seal single acting mechanical seal. Alternatively, a double acting mechanical seal or gland packing are available. Coupling rod with two pin joints with hardened and wear resistant components, easily assembled, grease lubricated and positively sealed with elastomer sleeves and two holding bands. Drive geared...

Why dosing pumps? Because they are used in applications such as agriculture, automotive industry, ceramics industry, construction, brewing industry and distilleries, chemical and biochemical industry, coating kitchen, confectionery industry, dough processing and bakeries, drinking water treatment, dyeing and varnishing industry, fruit and vegetable processing, metering of chemical additives, milk and dairy industry, paper machine, pharmaceutical and cosmetics industry, poultry and meat processing, oil, gas and petrochemical industry, shipbuilding, sludge dewatering, stock preparation,...

Overview of ranges The pumps of the MDT range feature a feed hopper with a cylindrical compression zone. Conveying media with a low degree of intrinsic flowability or with none at all are fed to the conveying elements rotor and stator through the auger feed screw on the coupling rod. Optimum filling of the conveying chamber is achieved through the priming pressure generated in the compression zone. Range MDT The pumps of the MDC range are equipped with open hygienic fork joints that can be cleaned almost without leaving residues through CIP continuous cleaning. They meet highest demands on...

Or visit www.seepex.com D 4.08E And what can we get flowing for you? Your nearest contact: