Fast material tests for lab and production Morapex Morapex® is able to analyse and therefore control either raw or dyed material in minutes rather than hours, compared to standard methods. It can be used for textiles (woven, non-woven, knitted, yarn or fibre), paper and leather. Morapex® A is a compact test device for use in production that can operate up to 95 °C and the Multi Liquor option (3 selectable tanks) is able to operate with a wide range of wash liquids. Morapex® S is a stationary unit for a wide range of applications within the laboratory. Morapex A with Mulit Liquor option The system works according to the method of forced desorption, which means the inner condition of a fabric is revealed. Testing is possible at any stage of production, e. g. on incoming fabrics, intermediate analysis during production, analysis of finished goods, research and development checks, the effect of process and equipment adjustments and more. Testing with Morapex® means with in a short time (minutes instead of hours) weaknesses are identified and errors are avoided at an early stage. This increases the efficiency of the production proces

The test material is placed between two plates, which are heated to a specific temperature at a pre-defined pressure. A test liquid is pressed through the fabric and the extract received is collected in a tube. This treatment gives two interesting results: First of all, the obtained extract can be analyzed quickly and easily (this contains all residuals, which are still held in the fabric). Secondly, the treated sample shows results in two minutes comparable to those achieved by standard fastness control methods. The Morapex® A unit is designed and optimised for use in production and works on...