System Components and Process Automation Electropneumatic Positioners ECOCENT 024.16.7 for central mounting on the top of the process control valves Main Features: • Compact stainless steel, high performance plastic design • Contact- free continuous sensor measuring of the valve spindle position • Easy start up • Pneumatic positioning for single acting actuators • High air ow rate for type 024.16.720 • Close tight function Valve assembled with Positioner 024.16.710 Body; Cocer; Sealing PPS/stainless steel; PC transparent; EPDM Ambient temperature 0 - 55°C Control medium Neutral gases, air according DIN ISO 8573-1 Pilot air ports G 1/8 Supply pressure; Air ow rate 1 - 7 bar 1); 7 Nl/min 3 - 7 bar 1); 130 Nl/min Intrinsic air consumption 0 l/min Power supply 24 V DC +/- 10% Power consumption < 3,5 W Electrical connection Multipol M12 (8- pins), stainless steel Setpoint setting; Output resistants 4 to 20 mA; 180 Ohm Stroke range valve spindle 3…28 mm 3 - 45 mm Binary input 0 - 5 V = log "0", 10 - 30 V = log "1" Bus communication NO AS-Interface optional Operation 2 Key button Visualisation 2 LEDs Protection class IP65/67 according to EN 60529 (only if cables plugs and sockets have been connected properly and in compliance with the exhaust air concept in chapter "pneumatic connection of positioner") Conformity subject to CE according EMV-9/336/EWG Approval CSA (in preparation) Option Analogue position feedback, 4 - 20 mA Option Process controller 1) Pressure stated in bar: are access to atmosphere; the supply pressure has to be 0,5 - 1 bar above the minimum required pilot pressure for the valve actuator System Components Process Automation Technical Data: Type Recommended for valve size

System Components and Process Automation Electropneumatic Positioner ECOSIDE 024.16.42 for process valves big stroke range and with remote control installation Main Features: • Compact metal housing • Contact- free continuous sensor measuring of the valve spindle position • Simple start up using tune function • Pneumatic positioning for single and double-acting actuators • High air capacity 77 Standardized for assembly • IEC 534-6 / VDI VDE 3845 according • Available as remote version with position sensor • Close tight function Type Technical Data: Body; Sealing Ambient temperature Control medium...