SED has designed a competitive range of investment cast T-Valves covering all major combinations in loop (main) and point of use sizes (branch). Our capability and experience in investment cast products ensures a reliable casting process and optimized high quality products. In addition all the bodies are checked according to detailed test specifications regarding material structure and density. The material is according to 1.4435/ 316L ASME BPE with mill certificate 3.1 for traceability. T-Valve bodies are designed to take or feed working media almost dead leg free. The valve bodies ideally are welded vertically in a main line or applied with several points of use in the main line. The application can be in any liquid transportation, e.g. water loops and mainly life science markets like pharmacy, biotech, cosmetics, food & beverage, but also in other industries. Competitive product offering Compact design, fully drainable Low weight Low energy product in terms of heat consumption for cleaning processes and material consumption for the product itself Available with manual and pneumatic actuation Tube end connection butt weld ends and others like clamps, flanges and unions on request Surface mechanically polished from 0,8 μm down to 0,4 Ra μm and e-polished Available butt weld tube end standards: DIN 11850 Series 2, ASTM 269 / ASME BPE, SMS 3008, DIN Selection Series Available actuators for assembly*: Series Diaphragm Size Pneumatically operated Manually operated *For detailed information please see catalogue “Valves for Aseptic Applications” Clamps optional

Point of Use Valves / T-Valves in investment cast Dimensions of T-Valve bodies: Butt weld Tube Ends acc. DIN Selection Series, Code 39 S1, S2 = Main Line / S3 = Branch Line S1, S2 Butt weld Tube Ends acc. DIN 11850 Series 2, Code 42 S1, S2 = Main Line / S3 = Branch Line S1, S2 Butt weld Tube Ends acc. SMS 3008, Code 49 S1, S2 = Main Line / S3 = Branch Line S1, S2 Am Schafbaum 2 D - 74906 Bad Rappenau www.sed-flowcontrol.com Phone: +49(0)7264/921-0 Fax: +49(0)7264/921-21 E-Mail: [email protected]