3/2 Way Plastic Pilot Valve Type 602 / 603
4Pages

/2 Way PDugftic PiB®ft Walv© The solenoid valves are electromagnetic, direct actuated pilot valves to control pneumatically operated valve actuators. Applicable media are filtered, lubricated or non lubricated air and neutral gaseous fluids. Type 602 is equipped with a hollow screw and made for direct Type 603 is designed for manifold mounting, where a variable amount of single pilot valves are assembled together and connected to the pneumatically operated valve actuators by pneumatic lines. • Compact design • Identical position of all ports for version normally open and normally closed (except connection M5) • Plastic wrapped electromagnet • Interchangeable solenoid system • 360° adjustable position of electromagnet • Also suitable for coarse vacuum • Silenced exhaust port • Manual override (depending on version) • Any installation position possible • Cable plug can be mounted turned by 180° • Combined exhaust optional - ATEX-Version for explosion-risk areas • Mounting rail for manifold mounting Type 603 available as option Banjo with push-in connection Banjo with threaded socket G1/8" Manifold assembly

Part list

3/2 Way Plastic Pilot Valve Type 602 / 603 Valve body Seat seal Standard versions 602.1,2.32.24.2.2.S5.1 .xx* 2 Direct mounting, Banjo Push-in connection f. tube 0 6mm G1/8" or G1/4" Plunger Direct mounting, Banjo Threaded socket G1/8" 602.1,2.32.24.2.2.M5.1.xx* 2 Direct mounting, Banjo Thread M5 at plunger Manifold mounting Manifold mounting *: xx equals for operating voltage. See page 2 "available operating voltages" or page 4 "Ordering Key" Filler plug G1/4" for Type 603 for single use / end of manifold Mounting rail for manifold mounting Type 603 Code 024.15.530.xx (xx - amount of...