Handing Locks (& Doors) All Keylex lock models are 'field reversible’.Therefore you do not need to specify the hand of the lock when ordering. However, when installing the Keylex 700 on rebated double doors it is necessary to establish the hand of the door in respect of the rebate kit.There are four distinct handing codes describing four possible applications: LH Left Hand = Clockwise closing door with the digital keypad on the push side. LHR Left Hand Reverse = Anti-clockwise closing door with the digital keypad on the pull side. RH Right Hand = Anti-clockwise closing door with the digital keypad on the push side. RHR Right Hand Reverse = Clockwise closing door with the digital keypad on the pull side. The hand of the lock is the same as the hand of the door.The hand of the rebate kit is the same as the hand of the lock. Rebate Kits (all models) Two part rebate kits are available (stainless steel) in the following sizes to suit all series of Keylex locks; 13mm, 19mm and 25mm Extra Thick Doors (all models) Extra long fixings, spindle extensions and passage turn extensions are available to suit any door thickness. Blanking Plates (all models) A blank plate for the passage function facility is available on the all Keylex models as are blanking buttons for the inside lever furniture on Keylex 700, 800 & 500 models only. Emergency & Panic Exit Devices (K2100 & K700 only) Conversions are available for all K2100 series and K700 series models allowing operation with rim mounted emergency exit and panic exit devices. Conversions are available for the following manufacturers' devices (rim mounted applications only - including latch and vertical rod designs), a) Briton b) Dorma c)Von Duprin Bi-directional coded access control via the same door is achieved using either the Keylex model K2100 or K700 in a back-to-back application. ‘Back-to-back’ is not available on Keylex models K800 & K500. K700B is the factory built solution available ex-stock to suit doors 35mm to 50mm thick. K700B2 is the factory built solution available ex-stock to suit doors 50mm to 65mm thick. K2100B is our modification introducing a mounting plate to one side of the door. This solution particularly addresses security requirements at external gates where it may be possible to access the ‘secure’ side of a gate by reaching through to the other side. This solution should never be introduced to doors on emergency exit routes. Where security is paramount and the opportunity for unauthorized observation of code entry exists, it is possible to introduce a spy shield to reduce the chance of code entry copying. Available to special order on all models. Securikey Limited, PO BOX 18,Aldershot, Hampshire,GUI2 4SL Telephone: +44 (0)1252 311888 Facsimile: +44 (0)1252 343950 Web: www.securikey.co.uk Email: [email protected] The normally smooth knob design on Keylex model K2100 can be modified to introduce a knurled or textured finish.This facilitates extra grip for use by the elderly, infirm or operation by those who may have wet hands. Available to special order. Rim Mounted Solutions (K2100, K800 & K500 only) Occasionally, door and frame designs dictate that conventional mortice lock solutions become impractical. Rim mounted solutions exist (for the models detailed above) and are, in the case of K800 & K500, normally available exstock. Because of the nature of their operation certain features such as passage function are unavailable. All rim mounted locks are supplied with knob furniture to both sides of the door. Internal Only Knob/Lever Sash Lock Euro Profile Cylinder Not Required 63mm Double Escutcheon Plates Blank Keyed Alike Master Keyed Finish Satin Chrome SC (Please Specify)_RH/LHR_ Exit Device Von Duprin 22 Briton Dorma Passage Snib Standard • Modification Blank Plate Spy Proof Housing Aluminium _Stainless Steel_• Key: • Default • Optional • Only You will receive this option Specify at order placement An inherent feature unless you specify otherwise KEYLEX 2100 HEAVY DUTY KEYLEX 700 STANDARD DUTY CLASSIC MINI Security Level Duty Level

INTRODUCTION TO THE RANGE In almost all security and access control situations, it is a requirement of authorised users that they have the facility to open the door from a point close at hand. The Keylex range of products addresses this requirement as they operate without wiring or battery power. APPLICATIONS Keyless access has many advantages. The simple entry of the correct code at the keypad unlocks the door and, because there are no keys to be stolen or lost, security is not at risk and the expense of producing and accounting for large numbers of keys is saved. Because Keylex locks are so...

LOCK OPERATION & FUNCTION DESCRIPTION - K2100 Clear Button Clearing Codes It is essential that any ‘spurious’ code be cleared before operation of the lock from the outside. The clear button should be pressed before your code. KEYLEX 2100 Use the Keylex 2100 on all external door installations and on any door where heavy traffic or extreme use and abuse can be expected. The proven design, with its built-in slipping clutch mechanism, will withstand all but the most violent attacks and can be expected to give many years service if specified and maintained correctly. STANDARD FEATURES & BENEFITS OPTIONAL...

LOCK OPERATION & FUNCTION DESCRIPTION - K700 Clear Button Clearing Codes It is essential that any ‘spurious’ code be cleared before operation of the lock from the outside. The clear button should be pressed before your code. OPTIONAL FEATURES & BENEFITS Use the Keylex 700 on all standard duty, high security external door installations and on any door where a flexible euro profile keying system is required. The ‘narrow stile’ design, with its built-in slipping clutch mechanism, will suit all stile widths down to 43mm and is particularly suited for use with aluminium or hollow metal sections. Key...