SYS-B08-7 Embedded Panel with 7” LCD display based on the NXP i.MX 6SoloX Processor Smart, compact, industrial 7” touch system built for loT HIGHLIGHTS CPU NXP i.MX6SX SoloX Processor, Single core Cortex®-A9 @ 1GHz + Cortex®-M4 core @ 227MHz LinuxA yoctO MAIN FIELDS OF APPLICATION Home Automation Industrial Info Kiosks Industrial Multimedia Other Interfaces 2 x I2C dedicated connectors (one reserved for Touch Screen) 6 analog inputs for A/D Conversion Programmable (*) expansion pin header connector, able to offer: • CSI interface input (PAL and NTSC formats supported) • Up to 20 GPIO • SPI interface • SPDIF Audio interface • I2S Audio interface • CAN interface (TTL level) • 5 x PWM • 3 x I2C • 3 x serial ports (2x RS-232 +1xRS-485 interface) Embedded Low Power RTC (*) Please note that some of these interfaces are factory options, other configurations are made via SW using the pin multiplexing possibilities of the i.MX6SX processor. *Measured at any point of SECO standard heatspreader for this product, during any and all times (including start-up). Actual temperature will widely depend on application, enclosure and/or environment. Upon customer to consider application-specific cooling solutions for the final system to keep the heatspreader temperature in the range indicated. Information subject to change. Please visit www.seco.com to find the latest version of this datasheet

SYS-B08-7 Embedded Panel with 7” LCD display based on the NXP i.MX 6SoloX Processor Normal line 6=0=0 TFT LCD MODULE 0=90° 12 o’clock direction Touchscreen specifications Active Ar< • 5-point multitouch • AsaHi glass with hardness 1.2J at fall-drop condition as 100cm + 130g steel ball LCD General specifications Optical specifications Item Required housing dimensions for the system (mm) • Suggested thickness 3mm