Q7 DEV KIT 2.0 Cross Platform Development Kit for Qseven® philosophy, compatible with both x86 and ARM Rev. 2.0 Qseven® modules flexible development Everything you need for DEVELOPMENT KIT CONTENTS The Development kit contains the following material: Module not included. Must be purchased separately • Cross Platform Carrier Board CQ7-A30 • LVDS optional Display • One 12Vdc Notebook Power Adapter • Add-on modules for LVDS / eDP and HDMI / DP • Cable kit -4^CRi>SS PLATFORM Philosophy SCHEMATICS PUBLICLY AVAILABLE s I ■b ! i i s _ Power +12Vdc Supply Coin cell battery Holder for CMOS and RTC Temperature* Dimensions 345 x 170 mm (13.58” x 6.69”) *All carrier board components must remain within the operating temperature at any and all times, including start-up; carrier operating temperature is independent of the module installed. Please refer to the specific module for more details. Actual temperature will widely depend on application, enclosure and/or environment. Upon customer to consider specific cooling solutions for the final system.

Q7 DEV KIT 2.0 BLOCK DIAGRAM OF CQ7-A30 USB miniB Socket UART-to-USB bridge Debug UART Realtek ALC888 HD Audio Codec J6 x Audio jacks, S/PDIF IN, S/PDIF Out Audio Slot UART + CAN Double DB9 Connector 'CC_RTC Coin Cell battery holder mSATA Slot miniSIM slot Qseven MXM connector Various miniPCI-e Slot Quad USB 2.0 Type A Socket USB 3.0 Type-A Socket USB 2.0 #6 / #7 Dual USB 2.0 Pin Header Feature Pin header Power connectors Power Secti HDMI/DP Slot 028.20 Information subject to change. Please visit www.seco.com to find the latest version of this datasheet