Q7-C26 Qseven® Rel. 2.1 Compliant Module with NXP i.MX 8 Applications Processors

REVISION HISTORY Revision 1.0 First Release Pictures updated Minor corrections Safety Policy Chapter added (par. 1.7) Reference specifications chapter 1.9 updated HDMI_CEC signal type updated Aligned to rev. C of the PCB: - CSI Camera connector pinout updated (par. 3.2.1) - Pull-up resistor value on GbE LED signals updated (par. 3.2.8) All rights reserved. All information contained in this manual is proprietary and confidential material of SECO S. p.A. All rights reserved. All information contained in this manual is proprietary and confidential material of SECO S.p.A. Unauthorised use, duplication,...

Q7-C26 Q7-C26 User Manual - Rev. First Edition: 1.0 - Last Edition: 1.1 Author: A.R - Reviewed by S.R. - Copyright © 2021 SECO S.p.A

Q7-C26 Q7-C26 User Manual - Rev. First Edition: 1.0 - Last Edition: 1.1 Author: A.R - Reviewed by S.R. - Copyright © 2021 SECO S.p.A

Warranty Information and assistance RMA number request Safety Electrostatic Discharges RoHS compliance Safety Policy Terminology and definitions Reference specifications Q7-C26 Q7-C26 User Manual - Rev. First Edition: 1.0 - Last Edition: 1.1 Author: A.R - Reviewed by S.R. - Copyright © 20

This product is subject to the Italian Law Decree 24/2002, acting European Directive 1999/44/CE on matters of sale and warranties to consumers. The warranty on this product lasts for 1 year. Under the warranty period, the Supplier guarantees the buyer assistance and service for repairing, replacing or credit of the item, at the Supplier’s own discretion. Shipping costs that apply to non-conforming items or items that need replacement are to be paid by the customer. Items cannot be returned unless previously authorised by the supplier. The authorisation is released after completing the specific...

What do I have to do if the product is faulty? SECO S.p.A. offers the following services: • • • SECO website: visit http://www.seco.com to receive the latest information on the product. In most of the cases it is possible to find useful information to solve the problem. SECO Sales Representative: the Sales Rep can help to determine the exact cause of the problem and search for the best solution. SECO Help-Desk: contact SECO Technical Assistance. A technician is at disposal to understand the exact origin of the problem and suggest the correct solution. E-mail: [email protected] Fax (+39)...

The Q7-C26 module uses only extremely low voltages. While handling the board, please use extreme caution to avoid any kind of risk or damages to electronic components. Always switch the power off, and unplug the power supply unit, before handling the board and/or connecting cables or other boards. Avoid using metallic components - like paper clips, screws and similar - near the board when connected to a power supply, to avoid short circuits due to unwanted contacts with other board components. If the board has become wet, never connect it to any external power supply unit or battery. Check carefully...

Safety Policy In order to meet the safety requirements of EN62368-1:2014 standard for Audio/Video, information and communication technology equipment, the Q7-C26 Module shall be: - used inside a fire enclosure made of non-combustible material or V-1 material (the fire enclosure is not necessary if the maximum power supplied to the module never exceeds 100 W, even in worst-case fault); used inside an enclosure; the enclosure is not necessary if the temperature of the parts likely to be touched never exceeds 70 °C; installed inside an enclosure compliant with all applicable IEC 62368-1 requirements;...

API CAN Bus CEC CSI2 DDC DDR DP DVI eDP FFC/FPC GBE Gbps GND GPI/O HDMI I2C Bus I2S JTAG LPDDR4 LVDS Mbps MIPI MMC/eMMC N.A. N.C. Application Program Interface, a set of commands and functions that can be used by programmers for writing software for specific Operating Systems Controller Area network, a protocol designed for in-vehicle communication Consumer Electronics Control, an HDMI feature which allows controlling more devices connected together by using only one remote control MIPI Camera Serial Interface, 2nd generation standard regulating communication between a peripheral device (camera)...

OpenGL OpenVG OTG PCI-e PHY PWM PWR RGMII SATA SD SDIO SM Bus SPI TBM TMDS TTL USB uSDHC Open Graphics Library, an Open Source API dedicated to 2D and 3D graphics Open Vector Graphics, an Open Source API dedicated to hardware accelerated 2D vector graphics On-the-Go, a specification that allows to USB devices to act indifferently as Host or as a Client, depending on the device connected to the port. Peripheral Component Interface Express Abbreviation of Physical, it is the device implementing the Physical Layer of ISO/OSI-7 model for communication systems Pulse Width Modulation Power Reduced...

Reference specifications Here below it is a list of applicable industry specifications and reference documents. FastEthernet, Gigabit Ethernet Qseven® Design Guide Qseven specifications Q7-C26 Q7-C26 User Manual - Rev. First Edition: 1.0 - Last Edition: 1.1 Author: A.R - Reviewed by S.R. - Copyright © 2021 SECO S.p.A

Introduction Technical Specifications Electrical Specifications Mechanical Specifications Block Diagram Q7-C26 Q7-C26 User Manual - Rev. First Edition: 1.0 - Last Edition: 1.1 Author: A.R - Reviewed by S.R. - Copyright © 2021 SECO S

The Q7-C26 is a Q7 Rel. 2.1 compliant module with NXP i.MX 8 Applications Processors. Featuring multicore processing (Single or Dual ARM Cortex®-A72 cores + Quad ARM Cortex®-A53 cores + Dual general purpose Cortex®-M4 processor) and 4Kp60 HEVC decoding, it is a scalable solution designed by SECO for home automation, transportation, digital signage and vending machines, and applicable to scenarios requiring advanced security, connectivity, multimedia and real-time response. The module offers a very high level of integration, both for all most common used peripherals in the ARM domain and for bus...