video corpo

VHM Conventional Tools
56Pages

{{requestButtons}}

Catalog excerpts

VHM Conventional Tools - 2

Using wide ranging experience in this field Seco Jabro Tools has developed an extensive range of VHM solid carbide universal end mills with diameters between 01 mm and 32 mm in various geometries and total length. The available VHM geometries are designed to cover a large range of applications.This enables us to offer standard products even for applications that usually require special tools. Shank description: VSL = Super long with OD reduction Tool designation Page Tool designation Page

Open the catalog to page 2
VHM Conventional Tools - 3

Cutting data-VHM Note that cutting speed is always given at the working diameter. See section "Cutting calculations and definitions" page 162 Note that longer versions of the tool may need a reduction of recommended axial depth of cutap. See section "Cutting calculations and definitions" page 162.

Open the catalog to page 3
VHM Conventional Tools - 4

Solid carbide radius cutter * Ordering example Picture key symbols see pages 14-15.

Open the catalog to page 4
VHM Conventional Tools - 5

Cutting data-VHM Note that cutting speed is always given at the working diameter. See section "Cutting calculations and definitions" page 162 Note that longer versions of the tool may need a reduction of recommended axial depth of cutap. See section "Cutting calculations and definitions" page 162.

Open the catalog to page 5
VHM Conventional Tools - 6

Solid carbide radius cutter * Ordering example: Picture key symbols see pages 14-15.

Open the catalog to page 6
VHM Conventional Tools - 7

Cutting data-VHM Note that cutting speed is always given at the working diameter. See section "Cutting calculations and definitions" page 162 Note that longer versions of the tool may need a reduction of recommended axial depth of cutap. See section "Cutting calculations and definitions" page 162.

Open the catalog to page 7
VHM Conventional Tools - 8

Solid carbide radius cutter Picture key symbols see pages 14-15.

Open the catalog to page 8
VHM Conventional Tools - 9

Cutting data-VHM Note that cutting speed is always given at the working diameter. See section "Cutting calculations and definitions" page 162 Note that longer versions of the tool may need a reduction of recommended axial depth of cutap. See section "Cutting calculations and definitions" page 162.

Open the catalog to page 9
VHM Conventional Tools - 10

Solid carbide radius cutter Picture key symbols see pages 14-15.

Open the catalog to page 10
VHM Conventional Tools - 11

Cutting data-VHM Note that longer versions of the tool may need a reduction of recommended axial depth of cutap. See section "Cutting calculations and definitions" page 162.

Open the catalog to page 11
VHM Conventional Tools - 12

Solid carbide sharp cutter * Ordering example: Picture key symbols see pages 14-15.

Open the catalog to page 12
VHM Conventional Tools - 13

Cutting data-VHM Note that longer versions of the tool may need a reduction of recommended axial depth of cutap. See section "Cutting calculations and definitions" page 162.

Open the catalog to page 13
VHM Conventional Tools - 14

* Ordering example: Picture key symbols see pages 14-15.

Open the catalog to page 14
VHM Conventional Tools - 15

Cutting data-VHM Note that longer versions of the tool may need a reduction of recommended axial depth of cutap. See section "Cutting calculations and definitions" page 162.

Open the catalog to page 15
VHM Conventional Tools - 16

Solid carbide sharp cutter * Ordering example: Picture key symbols see pages 14-15.

Open the catalog to page 16
VHM Conventional Tools - 17

Cutting data-VHM Note that longer versions of the tool may need a reduction of recommended axial depth of cutap. See section "Cutting calculations and definitions" page 162.

Open the catalog to page 17
VHM Conventional Tools - 18

Solid carbide sharp or corner radius cutter * Ordering example: Picture key symbols see pages 14-15.

Open the catalog to page 18
VHM Conventional Tools - 19

Cutting data-VHM Note that longer versions of the tool may need a reduction of recommended axial depth of cutap. See section "Cutting calculations and definitions" page 162.

Open the catalog to page 19
VHM Conventional Tools - 20

* Ordering example: Picture key symbols see pages 14-15.

Open the catalog to page 20
VHM Conventional Tools - 21

Cutting data-VHM Note that longer versions of the tool may need a reduction of recommended axial depth of cutap. See section "Cutting calculations and definitions" page 162.

Open the catalog to page 21
VHM Conventional Tools - 22

Solid carbide corner chamfer cutter Picture key symbols see pages 14-15.

Open the catalog to page 22
VHM Conventional Tools - 23

Cutting data-VHM Note that longer versions of the tool may need a reduction of recommended axial depth of cutap. See section "Cutting calculations and

Open the catalog to page 23
VHM Conventional Tools - 24

Solid carbide sharp cutter Picture key symbols see pages 14-15.

Open the catalog to page 24
VHM Conventional Tools - 25

Cutting data-VHM Note that longer versions of the tool may need a reduction of recommended axial depth of cutap. See section "Cutting calculations and definitions" page 162.

Open the catalog to page 25
VHM Conventional Tools - 26

Single-fluted solid carbide cutter (J28) Picture key symbols see pages 14-15.

Open the catalog to page 26
VHM Conventional Tools - 27

Cutting data-VHM Note that longer versions of the tool may need a reduction of recommended axial depth of cutap. See section "Cutting calculations and definitions" page 162.

Open the catalog to page 27
VHM Conventional Tools - 28

Solid carbide multi flute Picture key symbols see pages 14-15.

Open the catalog to page 28
VHM Conventional Tools - 29

Cutting data-VHM Note that longer versions of the tool may need a reduction of recommended axial depth of cutap. See section "Cutting calculations and definitions" page 162 .

Open the catalog to page 29
VHM Conventional Tools - 30

Solid carbide sharp cutter * Ordering example: Picture key symbols see pages 14-15.

Open the catalog to page 30
VHM Conventional Tools - 31

Cutting data-VHM Note that longer versions of the tool may need a reduction of recommended axial depth of cutap. See section "Cutting calculations and definitions" page 162 .

Open the catalog to page 31
VHM Conventional Tools - 32

* Ordering example: Picture key symbols see pages 14-15.

Open the catalog to page 32
VHM Conventional Tools - 33

Cutting data-VHM Note that longer versions of the tool may need a reduction of recommended axial depth of cutap. See section "Cutting calculations and definitions" page 162.

Open the catalog to page 33
VHM Conventional Tools - 34

Solid carbide corner radius cutter * Ordering example: Picture key symbols see pages 14-15.

Open the catalog to page 34
VHM Conventional Tools - 35

Solid carbide tapered end mill * Ordering example: Picture key symbols see pages 14-15.

Open the catalog to page 35
VHM Conventional Tools - 37

Solid carbide tapered end mill * Ordering example: Picture key symbols see pages 14-15.

Open the catalog to page 37
VHM Conventional Tools - 38

VHM Solid carbide tapered end mill HKM Type 1½° HKM 2 Part No. HKM015-015 [ Uncoated* Tolerances Run-out = 0.02 dmm = h5 Dc = +0.07/+0.03 -MEGA* • • • • Dc dmm l2 ap α° zn [ 1,5 3 40 6 1,5° 2 Dimensions in mm 13 19 27 37 42 52 * Ordering example: MEGA: HKM015-015-MEGA Uncoated: HKM015-015 Picture key symbols see pages 14-15. 143

Open the catalog to page 38
VHM Conventional Tools - 39

Solid carbide tapered end mill * Ordering example: Picture key symbols see pages 14-15.

Open the catalog to page 39
VHM Conventional Tools - 40

Solid carbide tapered end mill * Ordering example: Picture key symbols see pages 14-15.

Open the catalog to page 40
VHM Conventional Tools - 41

Solid carbide tapered end mill * Ordering example: Picture key symbols see pages 14-15.

Open the catalog to page 41
VHM Conventional Tools - 42

Solid carbide tapered end mill * Ordering example: Picture key symbols see pages 14-15.

Open the catalog to page 42

All SECO TOOLS catalogs and technical brochures

  1. TOOLING

    14 Pages

  2. Tooling

    358 Pages

  3. MILLING

    752 Pages

  4. MN 2014 Milling

    675 Pages

  5. Seco X4

    2 Pages

  6. Update 2013-2

    298 Pages

  7. MN 2012 Update

    116 Pages

  8. MN 2012 Turning

    652 Pages

  9. MM4500

    2 Pages

Archived catalogs