Catalogs >
SECO S.p.A. >
DEV-KIT-SMARC

DEV-KIT-SMARC
1 / 3Pages

Catalog excerpts

SMARC DEV-KIT-SMARC Cross Platform Philosophy Development Kit for SMARC Rel. 2.0 / 2.1.1 compliant modules The Development Kit contains the following material: • Carrier board for SMARC rel. 2.0 / 2.1.1 compliant modules RB79 1x certified High Speed HDMI cable, HDMI 2.0 compliant Serial Adapter Cables DP-to-HDMI adapter 1x SATA power cable Main power Adapter cable 1x certified High Speed DP cable, DP1.4 standard compliant SCHEMATICS PUBLICLY AVAILABLE Video Interfaces LVDS/MIPI-DSI connector, interface shared with 2x eDP connectors Backlight control + LCD selectable voltages dedicated connector 2xDP++ connectors HDMI connector (can be used in alternative to 1xDP++) 2x CSI Camera input interfaces Mass Storage SATA M 7p connector with dedicated power connector, interface shared with M.2 Socket 2 2230 / 2242 / 2260 Key B SSD slot microSD Card Slot Up to 2xDual RJ-45 Gigabit Ethernet connectors M.2 Socket1 2230 Key E Slot for WiFi/BT Modules (interface shared with PCI-e x 4 slot) M.2 Socket2 2260 / 3042 Key B Slot for WWAN Modem Modules (interface shared with PCI-e x 4 slot), connected to on-board microSIM slot 1 x USB 3.0 type A Socket 1 x USB 2.0 type A Socket 1 x USB OTG micro-AB Socket 1 x USB 3.1 Type-C Socket PCI-e x4 slot, interface shared with M.2 Slots TRSS Mic In + Line Out Audio Jack Onboard I2S Audio Codec (TI TLV320AIC3204) + HD Audio Codec (Cirrus Logic CS4207) I2S Audio header Serial Ports 2 x CAN ports 2 x RS-232/RS-422/RS-485 configurable serial ports on internal pin header 2 x Serial ports (Tx/Rx signals only, TTL level) on feature pin header Other Interfaces eSPI pin header + Flash Socket SPI pin header + Flash Socket I2C EEPROM Socket 4 x 7-segment LCD displays for POST codes Feature pin header with 2 x Serial ports, I2C, SM Bus, Watchdog and Power Management Signals GPIO / FuSa pin header FAN connector Optional Debug USB port on micro-B connector Boot selection switches JTAG connector Selector for SMARC 2.0 / 2.1 pinout compatibility Power Supply 9-24V through dedicated Mini-Fit Jr 2x2 power connector 6-17V through 2/3/4 Cell Smart Battery Connector RTC Coin cell battery holder Operating -40°C ÷ +85°C Temperature* Dimensions *All carrier board components must remain within the operating temperature at any and all times, including start-up; carrier operating temperature is independent of the module installed. Please refer to the specific module for more details. Actual temperature will widely depend on application, enclosure and/or environment. Upon customer to consider specific cooling solutions for the final system. Information subject to change. Please visit www.edge.seco.com to find the latest version of this datasheet Module not included. Must be purc

Open the catalog to page 1

Information subject to change. Please visit www.edge.seco.com to find the latest version of this datasheet DEV-KIT-SMARC SMARC 2.0 / 2.1.1 Development Kit BLOCK DIAGRAM

Open the catalog to page 2

DEVICE MANAGER A flexible operating system that adapts to your needs, thanks to the customization tool and Docker support. Reliability and security are built-in through a dual-partition system and native integration with Exein’s robust AI-based protection. Update, configure, and manage remote devices. Optimize time and costs to maximize operational efficiency and security without the need for costly field interventions. DATA ORCHESTRATION Integrate third-party services, simplify data flows and analysis, and enhance business efficiency by enabling easy and fast utilization of AI. Analyze...

Open the catalog to page 3